Sc Project Exhaust Buying Guide
SC Project exhausts are premium aftermarket motorcycle systems, typically made from titanium or stainless steel, that replace stock headers and slip-ons to cut weight and raise power. The core trade-off is full-system titanium (highest cost, race-only mapping needs) versus slip-on or stainless steel (street-legal, lower weight savings, no ECU remap). Buy full titanium only with a dyno-tuned map and race use; choose slip-on or homologated stainless for public roads and stock fueling.
At a glance
- Price range
- Price range not synced yet
- Category
- Engine, Exhaust & Fuel System Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- Full titanium systems typically save 3-7 kg versus OEM steel; slip-ons save 1-3 kg and retain stock headers
- Race-only systems have no catalytic converter or dB killer and require an ECU flash or piggyback fuel module
- Homologated (E-marked) versions include a cat and removable dB killer to pass European road noise and emissions tests
- Titanium headers resist heat discoloration but crack under repeated vibration if engine mounts and springs are not refreshed
Best use cases
- Track-day or race bike: choose the full titanium race system with no cat and a dedicated race ECU map; skip homologated slip-ons.
- Street-legal sportbike: pick the E-marked slip-on or homologated full system with dB killer installed; skip open race headers.
- Weight-focused dual-sport: select a titanium slip-on retaining the stock header and cat; skip full systems that void emissions compliance.
- Budget commuter: stay with OEM or a stainless steel homologated slip-on; titanium full systems add cost without street-legal gains.
Buying tips
- Match the system to your bike's exact model year and engine code; SC Project fits vary by generation even within the same model name.
- Require a Dynojet or equivalent dyno map for any full race system; stock ECU fueling runs lean above 8,000 rpm.
- Verify header flange diameter and spring hook spacing against your stock header before ordering a slip-on.
- Choose 0.8-1.0 mm titanium wall thickness for street durability; thinner race walls save weight but crack sooner.
Specs
| System Type | Full system vs slip-on |
|---|---|
| Material | Titanium / stainless steel |
| Road Legality | Race-only vs E-mark homologated |
| ECU Requirement | Remap required vs stock-compatible |
Related searches
What to check before buying
- Measure your stock header outer diameter at the slip-on joint; SC Project slip-ons fit 50-60 mm depending on model.
- Confirm your ECU is flashable or supports a piggyback module if installing a decat race system.
- Check local noise limits: homologated systems with dB killer typically measure 94-98 dB at 4,000-5,000 rpm.
- Verify your bike's exhaust valve actuator and O2 sensor threads match the SC Project bung and servo eliminator.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
