Photos from current listings. Actual item, color, and included accessories may vary.
Ignition Coil Buying Guide
An ignition coil is a step-up transformer that converts 12V battery voltage into the 20–40 kV needed to arc across the spark plug gap. The core trade-off is OEM-grade epoxy-potted windings with heat-rated insulation versus cheaper oil-filled or thin-resin coils that break down under heat cycling. The decision rule: match the exact engine code, coil family (e.g., UF-296, 032905106B), and cylinder count, and buy coils with a molded epoxy body and metal heat shield—skip unbranded units with no engine-code fitment.
At a glance
- Category
- Engine, Exhaust & Fuel System Parts
- Data updated
- Nov 15, 2026
Current offers
Ignition Coil Pack Unit fit for Volkswagen Jetta Golf 2.0L AEG 032905106B 178-8271$56.99
View on Mallflare
4x Ignition Coil fit for Honda CR-V 15-19 Accord 13-17 Acura ILX TLX 15-20 2.4L I4$86.99
View on Mallflare
Pack of 3 Ignition Coil + Spark Plugs fit for Mitsubishi Mirage L3 1.2L 14-15 UF815$86.99
View on Mallflare
Ignition Coils + Iridium Spark Plugs fit for Toyota C-HR Corolla iM 2017-21 1.8 2.0L$98.99
View on Mallflare
8x Ignition Coil + Spark Plug fit for Ford F150 Crown Victoria 4.6L 2001-2008$111.99
View on Mallflare
UF-296 Ignition Coil & 6 Iridium Spark Plugs fit for Jeep Cherokee XJ Wrangler TJ$123.99
View on Mallflare
6 X Ignition Coil + 6 X Spark Plugs fit for Infiniti QX4 3.5L V6 2001-2003 UF349 New$133.99
View on Mallflare
8x Ignition Coils Pack fit for Jaguar S-Type XF XJ8 XK Land Rover 2003-2010 UF519$134.99
View on Mallflare
6pcs Ignition Coil & Spark Plugs fit for Infiniti Q50 Q60 V6 3.0L 2016-21 UF-819$152.99
View on Mallflare
8x Ignition Coils & Spark Plug fit for Land Rover LR3 Range 4.4L 2005-2009$156.99
View on Mallflare
8 Ignition Coils & Spark Plugs fit for Infiniti QX5 Nissan Armada Pathfinder Titan$157.99
View on Mallflare
Valve Cover Fit Ford GM LS, polished, with high voltage wire and ignition coil MT039002$501.99
View on Mallflare
Fit Ford GM LS, black, with high voltage wire and ignition coil MT039001$501.99
View on Mallflare
Highlights
- Coil-on-plug (COP) designs eliminate plug wires and deliver higher voltage; older wasted-spark coil packs fire two cylinders and use plug wires.
- Epoxy-potted coils resist vibration and heat better than oil-filled coils; oil-filled units are more prone to leakage and arcing under high underhood temperatures.
- Primary resistance typically falls between 0.5–1.5 ohms; secondary resistance ranges 5,000–15,000 ohms—out-of-range readings indicate a failing coil.
- Iridium and platinum plug pairings matter: coil kits bundled with iridium plugs last 60,000–100,000 miles, while copper plugs need 30,000-mile swaps.
Best use cases
- Best fit: misfire codes P0300–P0308 on a specific cylinder—replace the single coil on that cylinder with the exact OEM-family part number, not a generic coil.
- Best fit: high-mileage full tune-up—replace all coils and plugs at once with a matched kit (e.g., 4x for 2.4L I4, 6x for V6, 8x for V8) to avoid repeat labor on adjacent failing coils.
- Wrong fit: buying a coil pack for a different engine code or cylinder count—e.g., a 4.6L Ford F-150 8x kit will not fit a 3.5L EcoBoost V6; verify engine displacement and VIN before ordering.
- Wrong fit: using a low-cost unbranded coil on a turbocharged or high-compression engine—heat and boost pressure accelerate insulation breakdown; choose OEM or reputable aftermarket brands.
Buying tips
- Count cylinders first: 4-cylinder engines need 4 coils, V6 needs 6, V8 needs 8—kits are sold in matched packs (4x, 6x, 8x) and buying the wrong count wastes money.
- Match the OEM part number or interchange family (e.g., UF-296, UF-349, 032905106B) rather than vehicle name alone; the same model year can use different coil families by engine code.
- Choose epoxy-potted coils with a metal heat shield over oil-filled or thin-resin units—potted coils resist heat cycling and vibration in coil-on-plug installations.
- If replacing one coil on a high-mileage engine, replace all coils on that bank or all cylinders with the same brand and batch to avoid mismatched resistance and repeat misfires.
Specs
| Coil Type | COP vs Coil Pack vs Wasted Spark |
|---|---|
| Cylinder Count | 4x / 6x / 8x matched kits |
| Primary Resistance | 0.5–1.5 ohms |
| Secondary Resistance | 5,000–15,000 ohms |
Related searches
What to check before buying
- Confirm engine displacement, engine code, and cylinder count from the VIN or underhood label before selecting a coil family.
- Check coil boot length and connector type—COP coils vary in boot length and plug terminal style (DIN vs. SAE) by engine family.
- Verify spark plug gap and type: iridium or platinum plugs are required for coil-on-plug systems; copper plugs may cause misfires under high voltage.
- Inspect the valve cover and spark plug well for oil leaks—leaking tube seals degrade coil boots and cause repeat failures even with new coils.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.