Photos from current listings. Actual item, color, and included accessories may vary.
Engine Air Filter Replacement Buying Guide
Engine air filters are the primary particulate barrier protecting the mass-air-flow sensor and combustion chamber from dust, so the key trade-off is filtration efficiency versus airflow restriction, dictated by media grade and pleat count. OE-style cellulose filters offer the best filtration per dollar, while oiled cotton gauze flows more but requires cleaning and risks MAF contamination if over-oiled. The decision rule: buy a filter whose part number cross-references to your exact engine displacement and model year, and prefer multi-pleat or synthetic-blend media over coarse single-layer foam.
At a glance
- Category
- Engine, Exhaust & Fuel System Parts
- Data updated
- Nov 15, 2026
Current offers
Fits Juke Sentra Tiida Rogue Tsuru 300ZX Engine Air Filter 16546-73C00$27.99
View on Mallflare
28113-3X000 Engine Air Filter Cleaner Element Fits 2011-2016 Hyundai Elantra$28.99
View on Mallflare
Engine Air Filter Cleaner Fits Chrysler Town&Country Dodge Caravan Grand$29.99
View on Mallflare
Engine Air Filter Fits Dodge Challenger Charger Chrysler 300 2011-2023 4861746AA$31.99
View on Mallflare
Engine Air Filter fit for Nissan Versa L4 1.8L 2012 CA10234 PA5669 A3198C A15669$33.99
View on Mallflare
Engine Air Filter fit for Volkswagen Golf/Jetta/Taos 2019-2023 5QM129620B CA12777$36.99
View on Mallflare
Engine Air Filter fit for GMC Terrain 3.0L 2010-2012 25899727 A3138C PXA49727$40.99
View on Mallflare
Engine Air Filter fit for Mercedes-Benz C300/C350/E350/GLK350 V6 3.5L 2012-2018$40.99
View on Mallflare
Engine Air Filter New fit for Chevy GMC 2500HD 3500HD 2006-2011 15918221 15282462$48.99
View on Mallflare
Air Filter Element fit for Kawasaki FD620D FD661D Engines 11013-2114 11029-2016$48.99
View on Mallflare
Cold Air Intake, 3.5 Inch Air System + Heat Shield Compatible With 2011-2023 Dodge Challenger/Charger 3.6L V6 Engine, High Flow Filter Kit Improve Horsepower/Throttle Response$112.99
View on Mallflare
4 Inch Cold Air Intake Kit + Filter Fit for Universal LSX LS1 LS2 4.8L/5.3L engines$169.99
View on Mallflare
Highlights
- Panel filters use 3-6 mm thick pleated cellulose or synthetic media with 50-150 pleats; higher pleat count raises dust-holding capacity without restricting CFM.
- Oiled cotton gauze (e.g., K&N-style) flows roughly 20-30% more than stock paper but must be re-oiled sparingly to avoid fouling hot-wire MAF sensors.
- Cartridge-style filters (cylindrical or conical) rely on a rubber or polyurethane end-cap seal; a hardened or misaligned end cap is the most common cause of unfiltered bypass.
- Part-number cross-reference is the only reliable fitment check: OEM numbers (e.g., 28113-3X000, 16546-73C00) map to specific engine-airbox combinations, not just vehicle nameplates.
Best use cases
- Daily-driven sedan or CUV in a dusty or urban environment: choose a stock-replacement pleated cellulose panel filter with the OEM-matching part number for maximum filtration and zero MAF risk.
- Truck or SUV used for towing or off-road: pick a heavy-duty synthetic-blend panel filter with reinforced pleats; skip oiled gauze if you drive in fine silt, which loads gauze quickly.
- Enthusiast seeking mild intake sound and reusable media: choose an oiled cotton conical or panel filter only if you will clean and re-oil every 30,000-50,000 km; skip it for forced-induction engines with sensitive MAF calibration.
Buying tips
- Match the OEM part number or a verified cross-reference (e.g., CA10234, 5QM129620B) rather than trusting vehicle nameplate alone, because engine displacement and airbox design vary within a model line.
- Measure the airbox opening and filter dimensions (length, width, height in mm) before ordering a universal panel; a 2-3 mm oversize will not seat and will leak unfiltered air.
- Prefer filters with a molded polyurethane or rubber perimeter seal over glued-on foam gaskets, which degrade and crumble into the intake tract over time.
- For reusable oiled filters, buy the matching cleaning and re-oil kit at the same time; using engine oil or over-oiling causes MAF contamination and drivability faults.
Specs
| Media Type | Pleated cellulose / synthetic / oiled cotton |
|---|---|
| Filter Style | Panel / cylindrical cartridge / conical |
| Seal Material | Molded PU or rubber perimeter |
| Service Interval | 15k-30k mi (halve in dust) |
Related searches
What to check before buying
- Record your VIN and engine displacement (e.g., 1.8L, 3.5L V6) and confirm the OEM filter part number stamped on the current filter or airbox lid.
- Measure the airbox cavity length, width, and depth in millimeters and compare to the replacement filter's published dimensions.
- Inspect the airbox lid and intake tract for cracks or missing clips, since a new filter cannot seal against a warped or damaged housing.
- For oiled filters, confirm you have a MAF-safe cleaner and re-oil kit, and check that your engine's MAF sensor is not already reading out of spec.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.