Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Nissan Sentra Fuel Pump Buying Guide

A Nissan Sentra fuel pump is an in-tank electric assembly that delivers gasoline at pressure to the engine; the core trade-off is OEM-grade turbine/brushless internals versus cheap brushed motors with thin housings. Durable options match the exact generation chassis and engine displacement with a sealed module and correct connector, while compromises fit multiple years loosely and use undersized pumps that overheat.

Generation Fit:B17 2013–2019 / B18 2020+Engine Match:1.8L vs 2.0L (not interchangeable)Motor Type:Turbine/brushless vs brushedAssembly Type:Complete module vs bare pump
Typical price range$87.99

At a glance

Category
Engine, Exhaust & Fuel System Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • Generation fit is model-specific: B17 (2013–2019) 1.8L uses module 170403SG0F, while B18 (2020+) and older B16 differ in tank depth and connector pinout.
  • OEM pumps use turbine or brushless DC motors rated for 60–80 psi continuous; budget brushed units drop pressure under load and shorten life.
  • Assembly includes sender unit, strainer, and float arm; buying a bare pump requires reusing a worn sender and risks inaccurate fuel gauge.
  • Housing material metal (steel/aluminum) resists ethanol corrosion better than thin stamped steel; check for zinc or epoxy coating on budget tiers.

Best use cases

  • Best fit: 2013–2019 Sentra 1.8L with hard-start or lean code — pick a complete assembly with sender, not a bare pump.
  • Wrong fit: 2020+ B18 or 2.0L SR models — skip 170403SG0F modules; they have different tank depth and connector.
  • Best fit: high-mileage daily driver — choose OEM-style turbine motor and new strainer to avoid repeat labor.
  • Wrong fit: performance/forced induction builds — stock replacement pumps lack flow headroom; skip unless running stock power.

Buying tips

  • Match by VIN or chassis code (B17 vs B18) plus engine displacement; 1.8L and 2.0L pumps are not interchangeable.
  • Buy a complete assembly with sender and strainer; bare pumps add labor and often reuse a failing fuel level sensor.
  • Prefer OEM-style turbine motor and metal housing with corrosion coating over unbranded brushed motors.
  • Verify connector pin count and fuel line quick-connect size match the original before installation.

Specs

Generation FitB17 2013–2019 / B18 2020+
Engine Match1.8L vs 2.0L (not interchangeable)
Motor TypeTurbine/brushless vs brushed
Assembly TypeComplete module vs bare pump

Related searches

What to check before buying

  • Confirm chassis generation (B17 2013–2019 vs B18 2020+) and engine displacement (1.8L vs 2.0L).
  • Measure fuel tank depth and module flange diameter to match the replacement assembly.
  • Check fuel line fitting type and electrical connector pinout against the old pump.
  • Inspect tank interior for rust or debris; replace strainer and fuel filter during installation.

FAQ

All Engine, Exhaust & Fuel System Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.