Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Ls2 Engine Buying Guide

The LS2 is a 6.0L aluminum-block Gen IV small-block V8 produced by General Motors from 2005–2009, distinguished from the LS1 by its larger 4.00-inch bore, higher-flowing 243/799 cylinder heads, and 24x/58x reluctor architecture. Buyers face a clear trade-off between complete dropout pullouts with harness and ECU versus long-block or short-block cores that require Gen IV-specific intake, front-drive, and 58x crank-reluctor compatibility. The decision rule is simple: match the engine's generation and reluctor tooth count to your ECM and transmission before prioritizing displacement or mileage.

Displacement:6.0L / 364 ci (4.00 in bore)Block Material:Aluminum w/ iron sleevesReluctor Type:58x crank / 4x cam (Gen IV)Head Port Style:Cathedral port (243/799)
Typical price range$104.99 – $245.99

At a glance

Category
Engine, Exhaust & Fuel System Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • LS2 uses a 4.00 in bore and 3.62 in stroke for 364 ci (6.0L), versus the LS1's 3.90 in bore—heads and pistons are not interchangeable without matching chamber volume.
  • Gen IV 58x crank reluctor and 4x cam sensor require a Gen IV ECM or converter box; Gen III 24x harnesses and calibrations will not run an LS2 directly.
  • Aluminum block with pressed-in iron sleeves saves roughly 80 lb over an iron 6.0L truck block but limits safe boost to about 8–10 psi without sleeve reinforcement.
  • LS2 intake manifolds use cathedral-port 243/799 heads; LS3-style rectangular-port heads and intakes do not bolt on without swapping both.

Best use cases

  • Best fit: a complete dropout pullout with harness, ECU, pedal, and accessory drive for a swap into a 1990s–2000s rear-wheel-drive chassis—buy the full package, not a bare long block.
  • Best fit: a naturally aspirated street build targeting 400–450 hp—the stock LS2 bottom end and 243 heads support this without internal upgrades; pair with a 58x-compatible ECU.
  • Wrong fit: a budget truck-towing build—an iron-block 6.0L (LQ4/LQ9) costs less and tolerates heat and boost better; skip the aluminum LS2 unless weight matters.
  • Wrong fit: a buyer planning an LS3 rectangular-port top end—buy an LS3 long block instead; converting an LS2 requires swapping heads, intake, and injectors.

Buying tips

  • Confirm 58x reluctor and 4x cam gear before purchase; a Gen III 24x engine marketed as 'LS2' will not run on a Gen IV ECM without a converter.
  • For boost above 10 psi, budget for forged pistons and rod bolts—the stock hypereutectic pistons and powdered-metal rods are the first failure point.
  • Match the accessory drive to your chassis: Corvette (Y-body) and GTO (V-body) front drives place the alternator and AC compressor differently, affecting frame clearance.
  • Inspect the aluminum block's iron sleeve walls for scoring and check head bolt threads in the aluminum—stripped threads require timeserts before reassembly.

Specs

Displacement6.0L / 364 ci (4.00 in bore)
Block MaterialAluminum w/ iron sleeves
Reluctor Type58x crank / 4x cam (Gen IV)
Head Port StyleCathedral port (243/799)

Related searches

What to check before buying

  • Verify the engine mount bosses match your chassis: LS2 uses the same three-bolt pattern as LS1, but Corvette and GTO drives differ in alternator and AC placement.
  • Confirm your ECU and harness support 58x crank and 4x cam signals; Gen III 24x harnesses require a reluctor converter or a Gen IV harness.
  • Measure transmission bellhousing depth and input shaft length for the 4L60E/4L80E or T56 you plan to mate—LS2 crank flange spacing differs from Gen I SBC.
  • Check underhood clearance for the tall LS2 intake manifold and drive-by-wire throttle body, especially in older, narrow engine bays.

FAQ

All Engine, Exhaust & Fuel System Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.