Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Kia Fuel Pump Buying Guide

A Kia fuel pump is the in-tank electric module that delivers pressurized gasoline from the tank to the injectors, and the primary trade-off is between OEM-style complete modules with new sender and strainer versus bare pump motors that reuse aged housings. Durable options match the exact Kia generation, engine displacement, and tank configuration with a new module assembly; compromises are universal drop-in pumps that ignore sender resistance and venturi geometry.

Fuel System:MPI in-tank vs GDI high-pressureModule Type:Complete assembly vs bare pump motorPressure Range:3–4 bar (43–58 psi) MPIFitment:Year/engine-specific OEM part number
Typical price range$104.99

At a glance

Category
Engine, Exhaust & Fuel System Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • Complete fuel pump modules include the pump motor, fuel level sender, strainer sock, and pressure regulator; bare pumps reuse the original sender and housing seals.
  • Kia fuel pump assembly part numbers are generation- and engine-specific—for example, 94460B2500 fits 2016–2019 Soul 1.6L and 2.0L, not earlier or turbocharged variants.
  • In-tank pumps run at 3–4 bar (43–58 psi) on most Kia MPI engines, while GDI engines require higher-pressure direct-injection pumps and cannot use MPI pump modules.
  • Module housings are typically metal or engineering plastic; the seal ring and locking ring must be replaced with the same profile to prevent evaporation codes and fuel leaks.

Best use cases

  • Best fit: a 2016–2019 Kia Soul 1.6L or 2.0L with a failed pump or erratic fuel gauge—buy the complete 94460B2500-style module to restore both delivery and sender accuracy.
  • Wrong fit: a Kia Soul turbo or a 2014–2015 model—those use different tank and pump assemblies; skip this module and match the exact VIN or engine code.
  • Best fit: high-mileage Kia MPI engines where the original housing is rusted or the sender is worn—the full module eliminates reusing compromised seals and electrical connectors.
  • Wrong fit: a GDI or direct-injection Kia engine—MPI pump modules do not generate the rail pressure required, so skip them and source the high-pressure pump circuit.

Buying tips

  • Match the OEM part number, engine displacement, and model year exactly; Kia fuel pump modules are not interchangeable across generations even when the engine size is the same.
  • Buy a complete module with sender and strainer rather than a bare pump motor—reusing a tired sender causes fuel gauge errors and reusing old seals causes EVAP leaks.
  • Check the fuel system type: MPI engines use a low-pressure in-tank pump, while GDI engines require a different high-pressure pump and cannot use MPI modules.
  • Confirm the connector pin count and tank locking ring profile; Kia modules vary between 4-pin and 5-pin connectors and different ring diameters across models.

Specs

Fuel SystemMPI in-tank vs GDI high-pressure
Module TypeComplete assembly vs bare pump motor
Pressure Range3–4 bar (43–58 psi) MPI
FitmentYear/engine-specific OEM part number

Related searches

What to check before buying

  • Verify the Kia model, model year, engine displacement, and fuel system type (MPI vs GDI) before selecting a module.
  • Match the OEM part number (e.g., 94460B2500 for 2016–2019 Soul 1.6L/2.0L) against the original pump or VIN.
  • Inspect the fuel tank opening and locking ring diameter; the new module seal and ring must match the tank neck.
  • Confirm the electrical connector pin count and wiring harness compatibility with the new module.

FAQ

All Engine, Exhaust & Fuel System Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.