Photos from current listings. Actual item, color, and included accessories may vary.
Honda Odyssey Fuel Pump Buying Guide
The Honda Odyssey fuel pump is an in-tank electric assembly combining the pump, sending unit, and strainer, and the primary trade-off is OEM-grade turbine construction versus low-cost generic internals that fail early. Buyers should choose a pump matching their exact model year and engine, with a sending unit calibrated to the correct resistance range, and avoid any unit that doesn't specify both.
At a glance
- Category
- Engine, Exhaust & Fuel System Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- Third-gen Odyssey (2005-2010) uses a 3.5L V6 with returnless fuel system and pump module P76415M; fitment is year-and-engine specific.
- OEM pumps use turbine-style impellers and glass-filled nylon housings; generic replacements often use brushed motors and thinner plastics.
- Sending unit resistance must match the Odyssey's fuel gauge spec (typically ~20-250 ohms) or the gauge reads empty/full incorrectly.
- Complete assemblies include strainer, flange gasket, and wiring pigtail; pump-only replacements require reusing worn sending units.
Best use cases
- Best fit: 2005-2010 Odyssey 3.5L V6 with hard-start, whining pump, or erratic fuel gauge — buy a complete assembly with sending unit.
- Wrong fit: 2011+ Odyssey (fourth-gen) — pump module and tank design differ; do not use 05-10 P76415M units.
- Best fit: high-mileage fleet or family van — choose OEM or OE-equivalent turbine pump with new strainer and gasket for durability.
- Skip: pump-only inserts on a van with a failed gauge — the sending unit is usually worn and must be replaced as an assembly.
Buying tips
- Match by exact model year and engine: 2005-2010 Odyssey 3.5L V6 uses P76415M-style module; 2011+ uses a different generation.
- Choose a complete assembly with new strainer, flange O-ring, and sending unit; reusing old seals causes EVAP codes and fuel smell.
- Verify sending unit resistance range matches the Odyssey gauge (approx. 20-250 ohms) before install to avoid false readings.
- Prefer turbine pump impellers and glass-filled nylon housings over brushed-motor generic pumps for ethanol-blend fuel durability.
Specs
| Pump Type | Turbine electric in-tank |
|---|---|
| Fitment Years | 2005-2010 Odyssey 3.5L V6 |
| Assembly Includes | Pump + sending unit + strainer |
| Sending Unit Range | ~20-250 ohms gauge match |
Related searches
What to check before buying
- Confirm exact model year, engine (3.5L V6), and tank configuration before ordering; 05-10 and 11+ modules are not interchangeable.
- Inspect fuel tank for rust or debris; a new pump in a contaminated tank will fail prematurely — clean or replace tank.
- Check fuel line fittings and electrical connector style match the vehicle harness; some modules use different pigtails.
- Have a new flange gasket and lock ring on hand; old seals often tear during removal and cause leaks.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.

