Car Gear Picks

Fram Air Filter Lookup Buying Guide

Fram air filters are drop-in engine intake filters identified by a letter-number code (e.g., CA10143) that must match your vehicle's air box footprint, height, and gasket profile. The primary trade-off is between standard cellulose (Fram Extra Guard) and higher-flow synthetic media (Fram Tough Guard/Ultra) that resist moisture and loading without warping. The decision rule: match the filter code to the exact year/make/model/engine, then choose media grade by dust load and service interval—never by filter shape alone.

Filter Media:Cellulose / Synthetic blend / Full syntheticGasket Type:Molded polyurethane vs foam stripFilter Shape:Panel (CA) vs Radial/round (RA)Service Interval:12k–25k mi by media grade

At a glance

Price range
Price range not synced yet
Category
Engine, Exhaust & Fuel System Parts
Data updated
Nov 15, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Fram part codes split into panel (CA-series) and radial/round (RA-series) formats; the code maps to a unique length, width, and height, not just a vehicle family.
  • Extra Guard uses cellulose-blend media; Tough Guard adds a synthetic reinforced blend; Ultra uses fully synthetic media with a metal screen for high-dust and turbo applications.
  • Sealing relies on a molded polyurethane gasket; a warped or oversized gasket causes unfiltered air bypass and false MAF readings.
  • Filter height variation within the same footprint (e.g., 1.5 in vs 2.0 in) changes airflow and must match the air-box lid clearance exactly.

Best use cases

  • Best fit: stock daily driver in moderate dust—use Extra Guard CA-series by exact engine code; skip Ultra unless the OEM specifies a high-capacity interval.
  • Best fit: turbocharged or dusty/diesel use—choose Tough Guard or Ultra for synthetic media and reinforced gasket; skip standard cellulose if service intervals exceed 12,000 miles.
  • Wrong fit: buying by vehicle year/make/model only without engine displacement/trim—the same model year can carry two air-box footprints; always cross-check the engine code.
  • Wrong fit: forcing a taller panel filter into a shallow air box—lid won't seat, gasket leaks, and the filter collapses; pick the exact height code instead.

Buying tips

  • Measure the old filter's length, width, and height with a ruler, then match all three to the Fram code's published dimensions—not just the vehicle lookup.
  • Match engine displacement and fuel type (e.g., 2.0L turbo vs 2.5L NA) because air-box lids and filter depths differ within the same model year.
  • Prefer a molded polyurethane gasket over a thin foam strip; polyurethane resists heat cycling and seals without grease.
  • For high-dust or off-road use, step up to synthetic media (Tough Guard/Ultra) rather than shortening cellulose change intervals.

Specs

Filter MediaCellulose / Synthetic blend / Full synthetic
Gasket TypeMolded polyurethane vs foam strip
Filter ShapePanel (CA) vs Radial/round (RA)
Service Interval12k–25k mi by media grade

Related searches

What to check before buying

  • Measure your air-box opening and existing filter length, width, and height before ordering; note any offset or notch in the gasket shape.
  • Confirm engine code/displacement and trim from the door jamb or VIN, not just the model year, since air boxes vary by engine.
  • Check air-box lid clearance and clip/screw positions; a taller filter must not prevent the lid from seating flush.
  • Verify the filter code's gasket profile matches the air-box channel—rectangular, trapezoidal, or radial—before install.

FAQ

All Engine, Exhaust & Fuel System Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.