Car Gear Picks

Borla S Type Exhaust Buying Guide

Borla S-Type is a cat-back or axle-back performance exhaust line using 304 stainless steel, mandrel bends, and a straight-through multi-core muffler that sits between Touring (quiet) and ATAK (aggressive) in volume. The core trade-off is sound level versus drone tolerance and budget: S-Type adds a deep, crisp tone at wide-open throttle with mild cruising presence, but it is louder than Touring and costs more than 409 stainless budget systems. The decision rule: buy S-Type only if you want a noticeably aggressive but daily-drivable tone and your local noise laws allow it; skip it for quiet highway commuting or if you need the loudest option, where ATAK or Touring respectively wins.

Material Grade:304 stainless (cat-back) vs 409/aluminizedSystem Type:Cat-back full vs axle-back rear sectionSound Level Tier:Touring < S-Type < ATAKTubing Diameter:2.25 / 2.5 / 3.0 in mandrel-bent

At a glance

Price range
Price range not synced yet
Category
Engine, Exhaust & Fuel System Parts
Data updated
Nov 15, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • 304 stainless steel construction with mandrel-bent tubing resists corrosion far better than 409 or aluminized steel, especially in salt-belt winters.
  • Multi-core straight-through muffler design (S-Type) delivers a deep tone with minimal restriction; Touring uses more sound absorption, ATAK uses less.
  • Cat-back systems replace everything from the catalytic converter rearward; axle-back systems replace only the rear muffler section for lower cost and easier install.
  • Borla's million-mile warranty applies to 304 stainless systems; entry-level 409 systems typically carry shorter coverage, so material grade directly dictates lifespan.

Best use cases

  • Best fit: daily-driven V6/V8 muscle cars and trucks where you want a clear, aggressive note on acceleration but tolerable highway drone — choose the cat-back S-Type for full tubing upgrade.
  • Best fit: lease-end or budget-conscious owners who want Borla sound without full system cost — choose the axle-back S-Type, which reuses factory mid-pipe and installs in under an hour with hand tools.
  • Wrong fit: buyers seeking maximum volume for shows or track events — skip S-Type and choose ATAK; S-Type is noticeably quieter at idle and part-throttle.
  • Wrong fit: condo or early-morning commuters sensitive to cold-start noise — choose Touring instead, since S-Type cold-start bark is significantly louder than stock.

Buying tips

  • Match system type to your goal: cat-back for full 304 stainless tubing and max flow; axle-back for budget and easy DIY install reusing factory mid-pipes.
  • Verify pipe diameter: S-Type cat-backs commonly use 2.5-inch or 3-inch mandrel tubing; factory mid-pipe diameter must match your axle-back clamp size.
  • Check tip and exit style: dual rear exit, side exit, and tip finish (chrome, black chrome, carbon) are model-specific — confirm your bumper cutout shape before ordering.
  • Confirm generation fitment: Borla S-Type part numbers differ by engine (V6 vs V8) and body style (coupe vs convertible, short vs long bed) — the same model year can use different systems.

Specs

Material Grade304 stainless (cat-back) vs 409/aluminized
System TypeCat-back full vs axle-back rear section
Sound Level TierTouring < S-Type < ATAK
Tubing Diameter2.25 / 2.5 / 3.0 in mandrel-bent

Related searches

What to check before buying

  • Measure your factory exhaust diameter at the cut point (2.25, 2.5, or 3 inches) and confirm the Borla system clamp size matches.
  • Check local noise ordinances: many municipalities cap exhaust at 95 dB at idle or under 3,000 rpm — S-Type cold-start can exceed stock by 10-15 dB.
  • Confirm bumper cutout and tip clearance: dual tips require wider cutouts than single; measure tip spacing before ordering.
  • Verify installation hardware: cat-back systems need new gaskets and clamps; axle-back systems often reuse factory flange hardware — inspect rust before buying.

FAQ

All Engine, Exhaust & Fuel System Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.