Car Gear Picks

Borla Atak Exhaust Buying Guide

Borla ATAK is the loudest, most aggressive cat-back and axle-back exhaust family from Borla, built from T-304 stainless steel with straight-through multicore mufflers. The core trade-off is maximum sound and flow versus cabin drone and neighborhood tolerance, so the decision rule is simple: pick ATAK only if you want a track-oriented volume curve and accept highway resonance; otherwise step down to S-Type or Touring.

Material Grade:T-304 stainless (vs 409/aluminized)System Type:Cat-back / axle-back / rear sectionSound Tier:ATAK > S-Type > TouringPiping Diameter:2.25 / 2.5 / 3.0 inch mandrel-bent

At a glance

Price range
Price range not synced yet
Category
Engine, Exhaust & Fuel System Parts
Data updated
Nov 15, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • ATAK uses Borla's multicore straight-through muffler with no internal baffling, producing the highest decibel output in the Borla line.
  • Construction is T-304 austenitic stainless steel with mandrel-bent 2.25-3.0 inch piping depending on application, resisting salt-belt corrosion far better than 409 or aluminized steel.
  • Axle-back ATAK systems retain the factory mid-pipe and resonator, while cat-back ATAK systems replace everything from the catalytic converter back and add measurable mid-range flow.
  • Borla's million-mile warranty applies to T-304 systems, and ATAK tips are typically 4-inch polished or black-chrome rolled edges with laser-etched branding.

Best use cases

  • Best fit: weekend and track-day V8 muscle cars (Mustang GT, Camaro SS, Challenger) where the owner wants an unmistakable idle and wide-open-throttle bark and accepts highway drone.
  • Best fit: truck and SUV owners (F-150, Silverado, Tahoe) adding axle-back ATAK for aggressive cold starts and towing-season presence without full cat-back expense.
  • Wrong fit: daily-commuter sedans, forced-induction four-cylinders, or family vehicles where rear-seat passengers need conversation at 70 mph—choose Borla Touring or S-Type instead.
  • Wrong fit: strict emissions-inspection states where cat-back replacement must retain the factory catalytic converter—ATAK cat-back keeps the cat but axle-back is the safer bolt-on.

Buying tips

  • Choose cat-back over axle-back if you want maximum flow and a tuned mid-range note; choose axle-back if you want ATAK volume with a bolt-on install and lower total cost.
  • Match piping diameter to your engine: 2.25-inch for naturally aspirated four-cylinders, 2.5-inch for V6 and small V8, 3.0-inch for high-output V8 and forced induction.
  • Confirm the system is T-304 stainless, not 409 or aluminized—T-304 is the only grade backed by Borla's million-mile warranty and resists chloride road salt.
  • Verify tip exit style (single, dual, quad, split rear) and cutout compatibility against your bumper valence before ordering; ATAK tip sizes range from 4.0 to 5.0 inches.

Specs

Material GradeT-304 stainless (vs 409/aluminized)
System TypeCat-back / axle-back / rear section
Sound TierATAK > S-Type > Touring
Piping Diameter2.25 / 2.5 / 3.0 inch mandrel-bent

Related searches

What to check before buying

  • Measure your factory exhaust flange and pipe diameter at the cut point—ATAK systems are vehicle-specific and clamp to OEM dimensions, not universal.
  • Check local noise ordinances and HOA rules: ATAK typically exceeds 95 dB at cold start, which fails some municipal and track-day sound limits.
  • Confirm your rear valence or bumper cutout accommodates the ATAK tip count and diameter, especially on quad-tip systems.
  • Verify emissions status: cat-back ATAK retains the factory catalytic converter, but some states require CARB EO numbers for any post-cat exhaust change.

FAQ

All Engine, Exhaust & Fuel System Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.