Photos from current listings. Actual item, color, and included accessories may vary.
Toyota Wheel Hub Buying Guide
A Toyota wheel hub is a sealed bearing-and-flange assembly that mounts the wheel to the steering knuckle or axle and carries the vehicle's load while allowing rotation. The core trade-off is between budget white-label hubs with unknown steel and seal quality versus OEM-grade or reputable aftermarket units with defined bearing clearances, ABS sensor compatibility, and corrosion protection. The decision rule: match the exact generation/chassis code and ABS tone-ring type, then choose a hub with a known bearing manufacturer and a multi-year warranty — skip any listing that does not state the ABS configuration and bolt pattern.
At a glance
- Category
- Suspension, Steering & Brake Parts
- Data updated
- Nov 15, 2026
Current offers
Front Wheel Hub & Bearing Set fit for Toyota Prius 2004-2009 HA590064 5-Bolt Square$75.99
View on Mallflare
Front Wheel Hub & Bearing fit for Lexus HS250h/Toyota Prius V 513257 5 Bolt ABS$75.99
View on Mallflare
5 Bolt Wheel Hub Bearing Assembly fit for Toyota RAV4 2006 - 2018 BR930765 512374$135.99
View on Mallflare
1x Front Steering Knuckle & Wheel Hub Bearing Assembly fit for Toyota Camry KA686248$155.99
View on Mallflare
Front Wheel Hub & Bearing fit for Toyota 4Runner/Tacoma 2003-2019 90119A0167$170.99
View on Mallflare
Highlights
- Bolt pattern and flange geometry are vehicle-specific: Prius 2004-2009 uses a 5-bolt square flange (HA590064), while RAV4 2006-2018 uses a different 5-bolt pattern (BR930765/512374) — hubs are not interchangeable across chassis codes.
- ABS-equipped hubs include an integrated magnetic encoder or tone ring; non-ABS hubs lack it, so installing the wrong type triggers a dash light and disables traction control.
- Steering knuckle assemblies (e.g., Camry KA686248) bundle the hub, bearing, and knuckle casting — replacing the whole unit restores geometry and saves pressing labor versus a bare bearing.
- Bearing grade separates durable hubs from early failures: OEM-style units use hardened GCr15 bearing steel with multi-lip seals, while budget hubs often use unspecified steel and single-lip seals that let water in.
Best use cases
- Best fit: daily-driven Prius, Camry, or RAV4 with a failing front bearing (hum/growl that changes with steering) — pick the exact chassis-code hub with ABS encoder and replace in pairs per axle.
- Best fit: 4Runner/Tacoma used off-road or with oversized tires — choose a hub with reinforced seals and a reputable bearing brand; the 90119A0167 hardware kit covers mounting bolts.
- Wrong fit: mixing a non-ABS hub onto an ABS-equipped trim to save cost — the speed sensor has no tone ring to read, so ABS and stability control stay disabled.
- Wrong fit: pressing a bare bearing into a corroded knuckle instead of replacing the knuckle-and-hub assembly on high-mileage Camrys — rust pitting ruins the new bearing's press fit.
Buying tips
- Identify the chassis code (e.g., Prius NHW20, RAV4 XA30/XA40, Camry XV50) before ordering — the same model name spans multiple hub designs across generations.
- Count the wheel bolts and confirm the ABS type: 5-bolt with integrated encoder is standard on most modern Toyota cars, but flange offset and hub diameter still vary.
- Choose hubs listing a bearing manufacturer (NTN, NSK, Koyo, SKF) or an OEM-equivalent spec; unbranded 'metal' hubs give no bearing-grade assurance.
- Replace both sides of an axle together — a worn hub on one side usually means the opposite bearing is at similar mileage and will fail soon after.
Specs
| Bolt Pattern | 5-bolt (verify chassis-specific spacing) |
|---|---|
| ABS Type | Integrated encoder vs non-ABS |
| Assembly Type | Hub/bearing unit vs knuckle assembly |
| Bearing Grade | OEM-equivalent (NTN/NSK/Koyo) vs unbranded |
Related searches
What to check before buying
- Confirm your vehicle's chassis code and production year range against the hub listing's fitment (e.g., Prius 2004-2009 vs 2010+ are different hubs).
- Verify ABS: does your trim have ABS/traction control, and does the hub include the magnetic encoder ring?
- Measure or confirm the wheel bolt pattern (5-lug spacing) and hub pilot diameter before ordering.
- Check included hardware: axle nut, mounting bolts (e.g., 90119A0167), and knuckle bolts — missing fasteners mean a second order.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.