Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Toyota Power Steering Pump Buying Guide

A Toyota power steering pump is the hydraulic vane pump that pressurizes ATF to assist steering, and the decisive trade-off is OEM-reman versus cheap new aftermarket castings. Buy a pump matched to your exact engine code, reservoir style, and pulley spec; skip any 'universal' listing that ignores those three variables.

Pump Type:Hydraulic vane, engine-drivenReservoir:Integral vs remote tankPulley:Included press-fit vs reuse OEMFitment Basis:Engine code + Toyota part number
Typical price range$93.99 – $130.99

At a glance

Category
Suspension, Steering & Brake Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • Toyota pumps are engine-specific vane pumps: the 2.7L Tacoma (21-5484), 1.6/1.8L Corolla (21-5875), and 3.4L V6 4Runner/Tacoma units share no internals.
  • Reservoir-on-pump vs remote-reservoir is fixed by chassis: 1996-2000 4Runner and 1996-2001 Tacoma 2.4/2.7L use an integral reservoir; most 2003-2008 Corolla/Matrix/Vibe pumps do not.
  • Pulley-included pumps save pressing: listings that ship with pulley and reservoir avoid reusing a worn press-fit pulley or cracked plastic tank.
  • Cast aluminum bodies with steel vane cartridges dominate; reman units typically replace the shaft seal, bearing, and flow-control valve, which are the actual wear points.

Best use cases

  • Tacoma 2005-2017 2.7L: pick the 21-5484-style pump with pulley; skip 3.4L V6 pumps, which mount differently.
  • 1993-1997 Corolla/Geo Prizm 1.6/1.8L: pick the 21-5875 pump; skip later Matrix/Vibe pumps despite shared engine family.
  • 1996-2001 Tacoma 2.4/2.7L or 1996-2000 4Runner: pick the reservoir-integral pump; skip remote-reservoir units.
  • 2004-2005 RAV4 4L (2.4L): pick the 44310-42070-spec pump with pulley; skip pumps without the correct pulley offset.

Buying tips

  • Match by engine code and year range first, then by Toyota part number (e.g., 44310-42070); part number beats listing title every time.
  • Choose pumps that include the pulley and reservoir when your original has them; reusing a worn pulley risks belt misalignment and squeal.
  • Prefer remanufactured OEM or pumps with new shaft seal, bearing, and flow-control valve; bare 'new' castings often reuse cheap seals.
  • Confirm the pressure line fitting thread and return nipple size match your hose; mismatch causes leaks that no warranty covers.

Specs

Pump TypeHydraulic vane, engine-driven
ReservoirIntegral vs remote tank
PulleyIncluded press-fit vs reuse OEM
Fitment BasisEngine code + Toyota part number

Related searches

What to check before buying

  • Verify your engine displacement and code (2.4L 2AZ, 2.7L 2TR, 3.4L 5VZ) against the pump's fitment list.
  • Check whether your chassis uses an integral reservoir or a remote tank before ordering.
  • Inspect belt routing and pulley groove count (typically 4- or 6-rib) to match the included pulley.
  • Confirm you have the correct pressure hose and new ATF (Dexron II/III or Toyota PSF) for the flush.

FAQ

All Suspension, Steering & Brake Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.