Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

RAM 1500 Strut Buying Guide

RAM 1500 struts are the front suspension's load-bearing and damping units, and the core trade-off is between quick-strut assemblies with matched springs versus bare struts that require spring compression and reuse of OEM components. The decision rule: buy loaded quick-struts for stock-height replacement, and buy bare struts only when pairing with lift springs or retaining verified low-mileage OEM springs and hardware.

Strut Type:Loaded quick-strut vs bare damperDrive Fit:2WD vs 4WD (not interchangeable)Suspension:Coil strut vs factory air strutLeveling Method:Preload spacer vs loaded lift strut
Typical price range$84.99 – $487.99

At a glance

Category
Suspension, Steering & Brake Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • Loaded quick-strut assemblies include coil spring, upper mount, and bearing pre-assembled; bare struts require a spring compressor and new upper mount/bearing for safe installation.
  • RAM 1500 front struts differ by drive type (4WD vs 2WD) and cab configuration; 4WD struts are longer and must match the truck's drivetrain to preserve CV axle and ball joint angles.
  • Air suspension struts (e.g., 4877147AA/4877146AA) are a separate system from coil-strut trucks; they require air line, compressor, and height sensor compatibility and cannot substitute for coil struts.
  • Leveling kits use either strut preload spacers (2.5'' style) or complete loaded struts (3'' style); preload spacers preserve OEM ride but increase spring preload, while loaded lift struts change both height and damping.

Best use cases

  • Stock-height replacement on a high-mileage 4WD RAM 1500: choose loaded quick-struts for both sides to restore ride height and damping without reusing worn mounts.
  • 2-3 inch front leveling on a 2012-2018 4WD: choose a preload spacer kit if keeping OEM springs, or a loaded lift strut if the OEM struts are worn and you want matched damping.
  • Air-suspension RAM 1500 (2013-2018 Classic with 3.0L/3.6L/5.7L): choose air struts with correct part numbers; skip coil-strut or spacer kits, which do not fit air-suspension frames.

Buying tips

  • Match strut to drivetrain first: 2WD and 4WD RAM 1500 front struts are not interchangeable; 4WD units account for different axle and steering geometry.
  • Replace struts in pairs: damping degrades gradually, so installing one new strut beside a worn unit causes uneven handling and faster tire wear.
  • For leveling, 2.5'' preload spacers retain OEM spring rate but add preload; 3'' loaded struts change spring and damping, so align both sides and check ball joint and CV angle limits.
  • Air struts require exact part-number compatibility (4877147AA right, 4877146AA left on 2013-2018 Classic); coil-strut trucks cannot use air struts without converting the full air system.

Specs

Strut TypeLoaded quick-strut vs bare damper
Drive Fit2WD vs 4WD (not interchangeable)
SuspensionCoil strut vs factory air strut
Leveling MethodPreload spacer vs loaded lift strut

Related searches

What to check before buying

  • Measure current fender-to-ground height on both sides to confirm stock height or target lift before selecting a strut or leveling tier.
  • Confirm the truck is 2WD or 4WD and whether it has factory air suspension; this determines strut family and part number.
  • Inspect upper mount, bearing, and spring condition; if reusing OEM springs with bare struts, replace mounts and bearings at the same time.
  • For leveling kits, check that the kit includes alignment hardware or plan for a front-end alignment after installation.

FAQ

All Suspension, Steering & Brake Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.