Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Quick Release Steering Wheel Buying Guide

A quick release steering wheel is a hub adapter that lets you remove the wheel for security, driver changes, or cockpit access, and the core trade-off is between a street-legal locking spline and a race-only fixed hex. Choose a 6-bolt 70mm PCD wheel with a locking QR for street use, or a fixed spline hex for track cars where theft and comfort are secondary.

Release Type:Locking spline vs fixed hexWheel PCD:6x70mm (also 3x50 / 6x74mm)Body Material:Billet 6061-T6 / 7075-T6 aluminumStack Height:50-70mm typical
Typical price range$179.99

At a glance

Category
Suspension, Steering & Brake Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • Genuine quick releases use a splined shaft with a spring-loaded locking collar; ball-detent or set-screw designs develop play and are unsafe at speed.
  • Wheel bolt pattern is almost universally 6x70mm PCD; 3x50mm and 6x74mm exist but limit wheel choice and replacement availability.
  • Race fixed hex (e.g., 3/4-inch or 5/8-inch) is stronger and cheaper than a locking spline but has no keyed anti-theft lock.
  • Street-legal locking QRs add a key cylinder and are thicker (typically 50-70mm stack height), which pushes the wheel closer to the driver.

Best use cases

  • Street/track dual-use car: pick a locking spline QR with 6x70mm PCD and a 350mm leather wheel; skip fixed hex because it has no theft deterrent.
  • Dedicated race car with fixed seat and harness: pick a fixed hex QR and a 330mm suede wheel; skip locking splines that add stack height and failure points.
  • Classic or restored car keeping original column: measure spline count and diameter first; skip generic 6-bolt kits unless you also buy a vehicle-specific hub adapter.

Buying tips

  • Measure your column spline diameter and count before ordering; a 6-bolt QR only fits if a vehicle-specific hub adapter exists for your car.
  • Add QR stack height (typically 50-70mm) to your wheel offset; if the wheel ends up more than 20mm closer, you need a shorter hub or a dished wheel.
  • Choose 6061-T6 or 7075-T6 billet aluminum over cast zinc or plastic-bodied QRs; cast parts wear at the spline and develop play.
  • For street use, confirm the QR has a keyed locking collar and a secondary safety pin; race-only fixed hex QRs have neither.

Specs

Release TypeLocking spline vs fixed hex
Wheel PCD6x70mm (also 3x50 / 6x74mm)
Body MaterialBillet 6061-T6 / 7075-T6 aluminum
Stack Height50-70mm typical

Related searches

What to check before buying

  • Column spline: measure diameter and count teeth; confirm a matching hub adapter is available for your make and model year.
  • Wheel PCD: confirm 6x70mm (most common) or 3x50mm/6x74mm and that your chosen wheel matches.
  • Stack height: measure from column face to wheel face; add 50-70mm for the QR and check clearance to stalks and knees.
  • Electrical: if your car has a horn or airbag, confirm the QR kit includes a horn slip ring and that you accept airbag deletion.

FAQ

All Suspension, Steering & Brake Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.