Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Nissan Altima Strut Buying Guide

A Nissan Altima strut is a structural suspension component that integrates a coil spring and damper into a single assembly, directly governing ride comfort, handling stability, and tire wear. The primary trade-off is between complete quick-strut assemblies (fast, safe, but not tunable) and bare struts requiring spring compression and reuse of OEM mounts (cheaper but labor-intensive and riskier). Choose complete assemblies for daily driving; choose bare struts only if you have the tools and expertise to transfer springs and mounts.

Strut Type:Quick-strut assembly vs bare strutDamper Design:Twin-tube (OEM) vs monotubeChassis Fitment:L32 (07-12) / L33 (13-18)Adjustability:Fixed OEM vs height/damping adjustable
Typical price range$464.99

At a glance

Category
Suspension, Steering & Brake Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • Quick-strut assemblies include spring, mount, and bearing pre-assembled; bare struts require reusing OEM springs and mounts with a spring compressor.
  • Twin-tube dampers dominate OEM replacement; monotube struts offer better fade resistance but stiffer valving and higher cost.
  • Altima strut fitment is generation-specific: L32 (2007-2012) and L33 (2013-2018) have different spring rates and top-mount bolt patterns.
  • Coilover kits like the observed set offer adjustable ride height and damping but often sacrifice daily comfort and corrosion resistance versus sealed OEM-style struts.

Best use cases

  • Daily-driven Altima with worn dampers: choose complete quick-strut assemblies for stock ride quality and bolt-on installation with basic hand tools.
  • Performance-focused driver seeking lowered stance: select a coilover kit with adjustable damping and camber plates, accepting firmer ride and periodic rebuilds.
  • Budget DIYer with spring compressor experience: bare struts and new mounts cut parts cost but add labor and safety risk; skip if you lack the tools.
  • Hybrid or 3.5L V6 Altima: verify strut valving matches engine weight—V6 models often use stiffer front struts than 2.5L four-cylinder cars.

Buying tips

  • Match strut to chassis code: L32 (2007-2012) and L33 (2013-2018) struts are not interchangeable due to spring perch and mount differences.
  • Replace struts in pairs per axle; mismatched damping causes uneven tire wear and unpredictable handling, especially in emergency maneuvers.
  • Prefer quick-strut assemblies with new top mounts and bearings; reusing old mounts is a leading cause of post-install noise and premature failure.
  • For coilovers, check spring rates: street kits typically run 4-6 kg/mm front; rates above 8 kg/mm are track-oriented and harsh on public roads.

Specs

Strut TypeQuick-strut assembly vs bare strut
Damper DesignTwin-tube (OEM) vs monotube
Chassis FitmentL32 (07-12) / L33 (13-18)
AdjustabilityFixed OEM vs height/damping adjustable

Related searches

What to check before buying

  • Verify chassis code (L32 vs L33) and engine (2.5L vs 3.5L) before ordering—spring rates and valving differ by powertrain.
  • Inspect existing top mounts and bearings; budget for replacement if reusing springs on bare struts.
  • Confirm you have a spring compressor and torque wrench for bare strut installation; quick-struts need only basic hand tools.
  • After installation, schedule a professional alignment—strut replacement alters camber and toe, causing rapid tire wear if uncorrected.

FAQ

All Suspension, Steering & Brake Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.