Line Lock Kit Buying Guide
A line lock kit is an electro-hydraulic solenoid valve that locks front brake pressure so rear tires can spin freely for burnouts, launching, or drag-racing staging. The primary trade-off is between a simple pressure-hold solenoid and a full electronic controller with timed release, and durability hinges on valve seal material and pressure rating rather than brand name. Buy a kit rated at or above your vehicle's peak brake line pressure with EPDM or Viton seals and a dedicated activation switch; skip bare no-name solenoids with unknown seal compounds.
At a glance
- Price range
- Price range not synced yet
- Category
- Suspension, Steering & Brake Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- Standard line lock solenoids are rated for 1,000–1,500 psi working pressure; brake systems with hydroboost or large-bore master cylinders can exceed 1,200 psi at full pedal, so match the valve rating to your system.
- EPDM seals are compatible with DOT 3/DOT 4 glycol brake fluid; Viton seals are required for DOT 5 silicone fluid—mismatched seal material causes swelling and internal leakage within months.
- Basic kits are a single normally-open solenoid plus a momentary pushbutton; premium kits add a timed-release controller (adjustable 1–10 second hold) and a second solenoid for independent front/rear control.
- Port sizes are typically 1/8 NPT or 1/4 NPT; 1/8 NPT is the common automotive standard for 3/16-inch and 1/4-inch brake lines, while 1/4 NPT suits 5/16-inch lines on heavier vehicles.
Best use cases
- Best fit: Dedicated drag-race or burnout car with a manual transmission and rear-wheel drive—choose a single 1/8 NPT solenoid kit with a momentary button and EPDM seals for DOT 4 fluid.
- Best fit: Street/strip car needing repeatable staging—choose a kit with a timed-release controller and a second solenoid so front brake pressure releases predictably without pedal modulation.
- Wrong fit: Daily-driven all-wheel-drive or front-wheel-drive vehicles—line locks only hold front brakes and will not produce a burnout; skip unless you are converting to rear-wheel-drive drag use.
- Wrong fit: Vehicles with DOT 5 silicone fluid using an EPDM-seal kit—select Viton seals or skip the kit entirely to avoid seal failure.
Buying tips
- Match port size to your brake line: measure the existing line OD—3/16 inch uses 1/8 NPT fittings, 1/4 inch uses 1/8 NPT or adapter, 5/16 inch uses 1/4 NPT; buying the wrong port requires adapters that add leak points.
- Confirm seal compound against fluid type: EPDM for DOT 3/DOT 4 glycol, Viton for DOT 5 silicone; never run DOT 5 in a system with EPDM seals.
- Select pressure rating at least 20% above your system's peak: a 1,000 psi valve is marginal for hydroboost systems that can see 1,200–1,500 psi; choose 1,500 psi rated for those applications.
- For repeatable launches, choose a kit with a timed-release controller adjustable from 1 to 10 seconds rather than a plain pushbutton; timed release prevents dragging brakes and inconsistent staging.
Specs
| Valve Pressure Rating | 1,000–1,500 psi working |
|---|---|
| Seal Material | EPDM (DOT 3/4) / Viton (DOT 5) |
| Port Size | 1/8 NPT or 1/4 NPT |
| Control Type | Momentary button / timed release |
Related searches
What to check before buying
- Measure your brake line diameter and thread pitch at the master cylinder or front brake junction before ordering; 3/16-inch line typically uses 3/8-24 or 1/8 NPT fittings.
- Identify your brake fluid type from the master cylinder cap or service records—DOT 3, DOT 4, or DOT 5—to select EPDM or Viton seals.
- Confirm your vehicle has a front/rear split brake system with accessible front brake line; line locks are installed on the front brake circuit only.
- Verify you have a switched 12-volt power source and space for a 30-amp relay and momentary switch within reach of the driver's seat.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
