Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Lift Kit Buying Guide

A lift kit raises a vehicle's ride height using spacers, blocks, shackles, or replacement springs to fit larger tires or improve clearance. The core trade-off is spacer-style kits (cheap, retain stock ride) versus full replacement systems (better geometry and durability). Choose a kit that matches your exact suspension type (coil, leaf, strut) and drive configuration (2WD vs 4WD); generic or misapplication kits cause alignment and CV joint issues.

Lift Type:Spacer / Leveling / Full SuspensionLift Height:1-6 inches (2-3 in most common)Material:Steel / Aluminum / Plastic (avoid plastic >1.5in)Drive Compatibility:2WD / 4WD specific kits
Typical price range$56.99 – $655.99

At a glance

Category
Suspension, Steering & Brake Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • Spacer kits (coil or strut spacers) are budget-friendly and preserve factory ride but increase CV angles and ball joint stress above 2.5 inches of lift.
  • Full replacement lift kits include new coil springs, leaf packs, and longer shocks, correcting suspension geometry and maintaining ride quality for 3+ inch lifts.
  • Steel construction with welded gussets and powder coating resists corrosion better than plastic or cast aluminum spacers, especially for off-road use.
  • Leveling kits (front-only spacers) are the simplest way to eliminate rake and fit slightly larger tires without altering rear suspension.

Best use cases

  • Best fit: 2-inch front leveling spacer kit for daily-driven trucks (e.g., Ram 1500, Chevy Colorado) to fit 33-inch tires and maintain stock ride—skip if you plan heavy off-roading or towing.
  • Best fit: 3-inch full suspension lift with new coil springs and shocks for Jeep XJ or similar solid-axle off-roaders—skip spacer-only kits if you need articulation and durability on trails.
  • Best fit: Rear shackle and block kit for leaf-sprung trucks (e.g., Silverado 1500) to add load capacity and lift—skip if your truck has coil rear suspension or you only need front leveling.

Buying tips

  • Measure your fender-to-ground height: a 2-inch lift typically fits 33-inch tires on most trucks, while 3 inches may require 35s and regearing.
  • Match kit material to use: steel spacers for off-road durability, aluminum for weight savings, avoid plastic spacers for any lift over 1.5 inches.
  • Check drivetrain: 4WD lifts above 2 inches often need transfer case drop or CV axle upgrades; 2WD kits are simpler but may need camber correction.
  • Verify kit includes all necessary hardware: extended brake lines, sway bar links, and alignment cams are often missing from budget spacer kits.

Specs

Lift TypeSpacer / Leveling / Full Suspension
Lift Height1-6 inches (2-3 in most common)
MaterialSteel / Aluminum / Plastic (avoid plastic >1.5in)
Drive Compatibility2WD / 4WD specific kits

Related searches

What to check before buying

  • Confirm your vehicle's suspension type (coil spring, leaf spring, strut, torsion bar) and drive configuration (2WD/4WD) before selecting a kit.
  • Measure current ride height and clearance to determine maximum lift without exceeding CV joint or brake line limits—typically 2.5 inches for independent front suspension.
  • Check wheel backspacing and tire size: lifts over 2 inches may require aftermarket wheels with less backspacing to avoid UCA contact.
  • Ensure kit includes or you budget for extended shocks, brake lines, and alignment components; factor installation labor if not DIY.

FAQ

All Suspension, Steering & Brake Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.