Photos from current listings. Actual item, color, and included accessories may vary.
Jeep Control Arm Buying Guide
Jeep control arms connect the axle to the frame and set caster, camber, and rear pinion angle, so the core trade-off is stamped steel with rubber bushings versus forged or tubular arms with rebuildable joints. The decision rule is simple: stock-height daily drivers should buy OEM-style stamped arms with bonded rubber bushings, while any lifted or off-road Jeep needs adjustable-length arms with flex joints and correct caster geometry.
At a glance
- Category
- Suspension, Steering & Brake Parts
- Data updated
- Nov 15, 2026
Current offers
2x Front Lower Control Arms Ball Joints fit for Jeep Patriot Compass 07-17 Caliber$120.99
View on Mallflare
Heavy Duty Front Upper Adjustable Control Arms fit for 1997-2006 Jeep Wrangler TJ$130.99
View on Mallflare
4x Rear Upper Lower Control Arm Ball Joint Fit for Jeep Grand Cherokee WJ 1999-2004$200.99
View on Mallflare
2x Front Lower Adjustable Control Arms 0-6" Lift fit for Jeep Wrangler JK 07-18 4WD$236.99
View on Mallflare
4PCS Front Control Arms Poly Bushings fit for Jeep Wrangler TJ Cherokee XJ 1984-2006$236.99
View on Mallflare
14pcs Front Upper Control Arms fit for 2011-2015 Dodge Durango Jeep Grand Cherokee$274.99
View on Mallflare
16X Front Upper & Lower Control Arm Suspension Kit Fits For 11-15 Jeep Grand Cherokee K621608 K621607$432.99
View on Mallflare
Full Set Adjustable Control Arms 0-6" Lift Fit for 2007-2018 Jeep Wrangler JK$758.99
View on Mallflare
Highlights
- OEM-style stamped steel arms with rubber bushings isolate noise and last longest at stock ride height but cannot correct geometry after a lift.
- Adjustable tubular arms use threaded ends to set caster and pinion angle; 0–6 in lift ranges require arms that can lengthen 1–3 in over stock.
- Flex joints (Johnny Joint, Heim, poly) trade street NVH for articulation; rubber or clevite bushings are quieter for daily driving.
- Jeep chassis families differ: TJ/XJ arms are short-arm 4-link, JK/JL use longer arms, and WJ/WK use independent front suspension with different arm counts.
Best use cases
- Stock-height daily-driven Wrangler TJ/JK or Cherokee XJ: buy OEM-replacement stamped arms with rubber bushings; skip adjustable arms and flex joints.
- Jeep with a 2–6 in suspension lift: buy adjustable upper and lower arms sized to the lift range to restore caster and pinion angle; skip fixed-length stock replacements.
- Jeep Patriot, Compass, or Caliber front suspension: buy the vehicle-specific front lower arm with pressed ball joint; skip Wrangler-style tubular arms entirely.
- Grand Cherokee WJ/WK or Durango with worn bushings: buy the full upper/lower kit for that chassis; skip generic 4-arm kits that don't match the independent suspension layout.
Buying tips
- Match arm length and adjustment range to your actual lift: a 0–6 in adjustable arm set fits lifted Jeeps, but stock-height Jeeps need fixed-length arms within ±0.25 in of OEM.
- Count the arms on your chassis before ordering: solid-axle TJ/XJ use 4 short arms plus a track bar, while WJ/WK independent front suspension uses separate upper and lower arms per side.
- Choose bushing type by use: rubber or clevite for street comfort, polyurethane for moderate trail use, and rebuildable flex joints only if you accept more road noise and maintenance.
- Inspect ball joints and bushings as a set: worn control arm bushings cause death wobble and uneven tire wear, so replace all arms on an axle together rather than one at a time.
Specs
| Arm Construction | Stamped steel vs tubular vs forged |
|---|---|
| Bushing/Joint Type | Rubber, polyurethane, flex joint |
| Length Adjustment | Fixed OEM vs 0-6 in adjustable |
| Chassis Fitment | TJ/XJ, JK/JL, WJ/WK, Patriot/Compass |
Related searches
What to check before buying
- Measure your current lift height and confirm the arm's stated adjustment range covers it before ordering.
- Identify the exact chassis code (TJ, JK, JL, XJ, WJ, WK, Patriot/Compass) because arm lengths and mounting widths differ across generations.
- Check whether your Jeep uses a solid front axle or independent front suspension to determine arm count and joint style.
- Confirm ball joint and bushing sizes match your axle and knuckle, and budget for an alignment after installation.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.