Photos from current listings. Actual item, color, and included accessories may vary.
Honda Accord Power Steering Pump Buying Guide
A Honda Accord power steering pump is a hydraulic vane pump that pressurizes fluid to assist steering, and the primary trade-off is between remanufactured OEM units and new aftermarket pumps with varying seal and bearing quality. The clear decision rule: match the pump to your exact engine (L4 2.4L vs V6 3.5L) and generation, because mounting, pulley, and pressure specs differ—never buy by model year alone.
At a glance
- Category
- Suspension, Steering & Brake Parts
- Data updated
- Nov 15, 2026
Current offers
215494 Power Steering Pump fit for Honda Pilot Accord Crosstour V6 3.5L 08-12$103.99
View on Mallflare
21-5419 Power Steering Pump For 02-11 -Honda Accord CR-V Acura TSX RSX 2.0L 2.4L$112.99
View on Mallflare
Power Steering Pump For 2003-2005 -Honda Accord Coupe & Sedan L4 2.4L 21-5341$112.99
View on Mallflare
Front Power Steering Pump fit for Honda Accord 2.4L 2003-05 21-5341 56110-RAA-A01$115.99
View on Mallflare
Highlights
- Accord pumps split by engine: L4 2.4L uses one pump family (e.g., 21-5341 for 2003–05), while V6 3.5L uses a different casting and pressure relief (e.g., 21-5419 for 2002–11).
- Honda pump part numbers follow a 5-digit chassis code (e.g., 56110-RAA-A01 for 2003–05 L4), so cross-reference the number on your original pump before ordering.
- Remanufactured pumps reuse the OEM housing and pulley but should include new seals, bearings, and a flow-control valve; new aftermarket pumps vary widely in vane and shaft hardness.
- A failing pump typically leaks at the shaft seal or whines under load; replacing the reservoir O-ring and flushing the system prevents repeat failure.
Best use cases
- Best fit: 2003–2005 Accord L4 2.4L with a whining or leaking pump—choose 21-5341 or 56110-RAA-A01; skip V6 pumps, which will not bolt to the L4 bracket.
- Best fit: 2008–2012 Accord V6 3.5L—choose 215494; skip 4-cylinder pumps because pulley offset and line fittings differ.
- Wrong fit: mixing a 2002–2011 CR-V/TSX/RSX pump (21-5419) into an Accord without verifying the chassis code—mounting bosses and pressure specs are not universal across those platforms.
Buying tips
- Confirm engine displacement and body style first: 2003–2005 L4 coupe and sedan share 21-5341, but V6 models use a different pump entirely.
- Match the 5-digit Honda part number (e.g., 56110-RAA-A01) from your original pump or VIN; aftermarket cross-references can be off by one generation.
- Prefer pumps that include a new pulley, reservoir O-ring, and flow-control valve—reusing a worn pulley or valve causes belt slip and pressure spikes.
- For remanufactured units, confirm the core has been machined and fitted with new bearings and seals; 'resealed only' units fail prematurely.
Specs
| Engine Fit | L4 2.4L vs V6 3.5L |
|---|---|
| Pump Type | Hydraulic vane pump |
| Part Number Format | 56110-XXX-XXX |
| Included Components | Pump / pulley / O-ring / valve |
Related searches
What to check before buying
- Verify engine code and displacement (L4 2.4L vs V6 3.5L) and model year range before ordering—Honda changed pump castings across generations.
- Inspect the original pump for the 5-digit part number and compare it to the listing's cross-reference.
- Check that the new pump includes the correct pulley and reservoir O-ring, or order them separately.
- Confirm the pressure line fitting thread and banjo bolt size match your vehicle's high-pressure hose.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.