Photos from current listings. Actual item, color, and included accessories may vary.
Honda Accord Brake Caliper Buying Guide
A Honda Accord brake caliper is the hydraulic clamp that presses the pads against the rotor, and the key trade-off is between remanufactured OEM units, new aftermarket castings, and big-brake upgrades. Buyers must match caliper generation, piston count, and bracket style to the exact Accord chassis, or risk poor pedal feel and uneven pad wear. The decision rule: choose a new or quality reman caliper with the correct bracket and piston size for your trim, skip generic 'universal' units and mismatched left/right listings.
At a glance
- Category
- Suspension, Steering & Brake Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- OEM Accord calipers are typically single-piston sliding designs; Sport/Type R trims may use larger pistons or dual-piston fixed calipers.
- Remanufactured calipers are original castings rebuilt with new seals and pistons; new aftermarket calipers use fresh castings but vary in metallurgy.
- Caliper brackets are chassis-specific: 2013-2017 Accord rear left calipers use a distinct bracket offset from earlier generations.
- Piston material matters: steel pistons resist heat but can corrode; phenolic pistons insulate heat but may crack in extreme use.
Best use cases
- Daily-driven 2013-2017 Accord: pick a reman or new single-piston rear left caliper with bracket, matching the 9th-gen chassis exactly.
- Track or mountain-duty Accord: upgrade to a big-brake kit with fixed multi-piston calipers and high-temp seals; skip reman sliding calipers.
- Budget repair on a high-mileage 8th-gen: use a quality reman caliper only if the bracket and slide pins are included and the core is rebuildable.
- Wrong fit: buying a 'universal' caliper or a left/right pair without confirming piston diameter and bracket bolt spacing for your trim.
Buying tips
- Match the caliper to the chassis code: 2013-2017 Accord (CR1/CR2/CR3) rear calipers differ from 2008-2012 (CP1/CP2/CP3) in bracket and hose routing.
- Confirm piston diameter: base 4-cylinder models often use a smaller piston than V6 or Sport trims; mismatch causes front/rear bias errors.
- Choose brackets included: listings without brackets require transferring the old bracket, which adds labor and corrosion risk.
- Prefer calipers with stainless steel slide pins and new bleeder screws; reused corroded pins are a common cause of drag and uneven wear.
Specs
| Caliper Type | Sliding single-piston vs fixed multi-piston |
|---|---|
| Piston Material | Steel vs phenolic vs aluminum |
| Bracket Included | With bracket vs caliper only |
| Fitment Generation | 8th (2008-2012) / 9th (2013-2017) / 10th (2018+) |
Related searches
What to check before buying
- Verify your Accord's year, trim, and rear brake type (solid vs vented rotor) before ordering; caliper piston size and bracket differ.
- Measure rotor thickness and diameter: worn rotors below minimum spec require replacement, not just a new caliper.
- Check wheel clearance: big-brake calipers may not fit 16-inch wheels; 17-inch or larger is often required.
- Confirm brake fluid type (DOT 3 or DOT 4) and bleed the system after install; trapped air causes a spongy pedal.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.

