Photos from current listings. Actual item, color, and included accessories may vary.
Ford F 150 Wheel Hub Buying Guide
A Ford F-150 wheel hub is the sealed bearing-and-flange assembly that mounts the wheel to the knuckle and carries ABS sensor integration; the core trade-off is OEM-grade sealed bearing metallurgy and ABS tone-ring compatibility versus cheap repacks with unknown bearing grade. The decision rule: match the exact drive configuration (RWD vs 4WD), model year, and bolt pattern, and choose hubs with a stated bearing steel grade and ABS-ready tone ring — generic 'metal' hubs without generation-specific fitment are compromises.
At a glance
- Category
- Suspension, Steering & Brake Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- 2018–2020 F-150 RWD front hubs use a 6-bolt flange pattern and ABS-integrated sensor ring; 4WD hubs share bolt count but differ in knuckle offset and bearing load rating.
- Hub assembly part numbers 515188 / WA515188 / HL3Z1104B are generation-specific to 2018–2020 RWD fronts — cross-year or 4WD mixing causes misalignment and premature bearing failure.
- Sealed-for-life hub bearings rely on bearing steel grade (e.g., GCr15 / 52100) and multi-lip seals; ungraded 'metal' hubs typically use lower-carbon steel and single-lip seals that fail early.
- Hub-centric flange runout and ABS tone-ring tooth count must match the truck's ECU; mismatched tone rings trigger ABS/traction-control codes even when the hub physically bolts on.
Best use cases
- Best fit: 2018–2020 F-150 RWD front bearing replacement — pick 515188 / HL3Z1104B equivalents with stated bearing steel grade and ABS tone ring.
- Best fit: high-mileage or towing/hauling trucks — choose hubs with reinforced bearing cages and multi-lip seals rated for higher axial loads; skip budget single-seal hubs.
- Wrong fit: 4WD or pre-2018 F-150 — do not substitute 515188 RWD hubs; use the 4WD-specific knuckle-offset hub and verify tone-ring tooth count.
- Wrong fit: performance/off-road lifted builds — stock replacement hubs are not rated for oversized tires and increased scrub radius; skip them for HD bearing assemblies.
Buying tips
- Confirm drive type first: RWD and 4WD F-150 front hubs are not interchangeable even when bolt counts match — order the RWD-specific 515188 only for 2018–2020 RWD.
- Match part number to model year: HL3Z1104B and 515188 cover 2018–2020 RWD fronts; earlier (2015–2017) and later (2021+) hubs use different knuckle geometry.
- Require a stated bearing steel grade (GCr15/52100 or equivalent) and multi-lip seal construction; 'metal' alone is not a material specification.
- Verify ABS tone-ring tooth count and sensor compatibility against the truck's ECU — wrong tone rings cause ABS/traction lights even with correct bolt pattern.
Specs
| Drive Fitment | RWD vs 4WD (not interchangeable) |
|---|---|
| Bolt Pattern | 6-bolt front flange |
| Bearing Grade | GCr15/52100 sealed vs ungraded |
| ABS Integration | Tone ring + sensor port required |
Related searches
What to check before buying
- Measure your truck's bolt pattern and flange offset (6-bolt RWD front) and confirm against the hub's stated fitment before ordering.
- Confirm model year is within 2018–2020 for 515188/HL3Z1104B hubs; 2015–2017 and 2021+ require different part numbers.
- Check ABS sensor connector type and tone-ring tooth count match your F-150's ECU to avoid dash codes.
- Verify wheel/tire size and offset remain stock or near-stock; oversized tires increase hub load and void standard bearing ratings.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.


