Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Ford F 150 Control Arm Buying Guide

Ford F-150 control arms are the stamped-steel or cast-aluminum pivoting links that connect the frame to the wheel hub, and the primary trade-off is stamped/riveted OEM-style assemblies versus fully serviceable tubular or forged replacements with pressed-in or bolt-on ball joints. The decision rule: match the arm to your truck's generation-specific knuckle and ball-joint taper, and buy assemblies with replaceable ball joints if you plan to keep the truck past the next 100,000 miles.

Arm Construction:Stamped steel vs forged/tubularBall Joint Type:Riveted OEM vs bolt-in serviceableDrivetrain Fit:2WD vs 4WD-specificGeneration Fit:2004–2008 vs 2009–2014 vs Raptor
Typical price range$173.99 – $483.99

At a glance

Category
Suspension, Steering & Brake Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • Generation split governs fit: 2004–2008 (11th gen) uses different upper/lower arms and ball-joint tapers than 2009–2014 (12th gen), and the 2010–2014 SVT Raptor runs unique lower arms (AL3Z3078B) with a wider track.
  • 2WD and 4WD F-150s do not share lower control arms on most generations; the spindle/knuckle and ball-joint mounting differ, so a 2WD kit will not bolt onto a 4WD truck.
  • OEM-style arms are stamped steel with riveted or staked ball joints; better replacements are forged or tubular steel with bolt-in or threaded ball joints and grease fittings.
  • Aluminum lower arms appear on some later F-150s for weight savings, but steel remains the durability standard for trucks used off-road or with load; aluminum arms should not be mixed with steel on the same axle.

Best use cases

  • Daily-driven 2009–2014 F-150 with worn bushings: buy a complete front lower arm with pressed ball joint (e.g., 9L3Z3078A / K621266 equivalent) rather than pressing a bare joint into a corroded original arm.
  • 2010–2014 SVT Raptor: use Raptor-specific lower arms (AL3Z3078B / RK623211); standard F-150 arms will not correct the wider track or handle the Raptor's increased suspension travel.
  • 2004–2008 F-150 or Lincoln Mark LT full front refresh: buy a matched upper-and-lower kit with sway-bar end links; mixing new arms with original end links leaves the most common wear point untouched.
  • Lifted or heavy off-road use: skip stamped OEM-replacement arms and choose forged or tubular arms with serviceable ball joints and polyurethane bushings; stock stamped arms flex and fatigue under repeated articulation.

Buying tips

  • Confirm drivetrain first: 2WD and 4WD F-150 lower control arms differ in ball-joint taper and knuckle mounting; ordering the wrong one means the ball joint will not seat or the arm will not clear the axle.
  • Match the part number to the generation: 2004–2008 arms are not interchangeable with 2009–2014 arms, and Raptor arms are unique to 2010–2014 SVT trucks.
  • Choose arms with bolt-in or threaded ball joints over riveted OEM-style joints if you want to replace the joint separately later; riveted joints require grinding or drilling to service.
  • Inspect bushing material: rubber bushings give stock ride isolation, polyurethane bushings last longer under load but transmit more road noise; pick based on whether the truck is a highway commuter or a work/off-road rig.

Specs

Arm ConstructionStamped steel vs forged/tubular
Ball Joint TypeRiveted OEM vs bolt-in serviceable
Drivetrain Fit2WD vs 4WD-specific
Generation Fit2004–2008 vs 2009–2014 vs Raptor

Related searches

What to check before buying

  • Measure your truck's year, drive type (2WD/4WD), and trim (standard F-150 vs SVT Raptor) before ordering — these three factors determine the correct arm part number.
  • Check the ball-joint stud taper and diameter against the replacement; a mismatched taper will not torque correctly and can loosen in the knuckle.
  • Verify the arm includes or reuses the original mounting hardware and that the bushings match the frame bracket width; aftermarket arms sometimes require different-width brackets.
  • Inspect the opposite side and sway-bar end links at the same time — control-arm wear rarely happens in isolation, and a full front kit saves a second alignment.

FAQ

All Suspension, Steering & Brake Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.