Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Dodge Charger Strut Buying Guide

Dodge Charger struts are the front or rear damper assemblies that control spring oscillation and ride height, and the key trade-off is between OEM-style passive hydraulic units and electronically adaptive (ADS) units used on performance trims. Buyers must match strut type to the Charger's factory suspension code: passive units for SE/SXT and base R/T, electronic units for AWD, Scat Pack, SRT, and Hellcat variants. The decision rule is simple—if your Charger has an ADS module or AWD badge, you need electronic or AWD-specific struts; otherwise, a quality passive twin-tube or monotube strut is the durable choice.

Strut Type:Passive twin-tube / monotube / electronic ADSDrivetrain Fitment:RWD vs AWD-specific front geometryElectronic Control:ADS solenoid vs passive (no connector)Piston Rod Diameter:20–25 mm steel rod
Typical price range$230.99 – $289.99

At a glance

Category
Suspension, Steering & Brake Parts
Data updated
Nov 15, 2026

Current offers

Highlights

  • Charger struts split into passive twin-tube (base models), passive monotube (performance), and electronic adaptive (ADS) units with solenoid valves—mixing types causes damping faults and uneven handling.
  • AWD Chargers (2012–2023 3.6L V6) use front struts with different lower mount and spring perch geometry than RWD models; AWD-specific struts are required for correct ride height and CV clearance.
  • Electronic struts for 2015–2023 Challenger/Charger carry OE part numbers like 5181906AB/5181905AB and require the ADS harness and module to function; passive struts on an ADS car trigger a suspension fault light.
  • Strut durability hinges on piston rod diameter (20–25 mm), twin-tube vs monotube construction, and spring seat material—plastic seats crack under repeated jounce, while steel or reinforced rubber seats last longer.

Best use cases

  • Daily-driven 2012–2023 Charger SE/SXT/R/T RWD: choose passive twin-tube struts with steel spring seats and new upper mounts—skip electronic units that won't plug in.
  • AWD 3.6L V6 Charger (2012–2023): must use AWD-specific front struts with correct perch height; RWD struts will upset ride height and stress CV joints—skip generic 'fits all' listings.
  • 2015–2023 Scat Pack/SRT/Hellcat with ADS: replace with electronic struts matching OE 5181905AB/5181906AB or equivalent; passive conversion requires module bypass and is not a bolt-in—skip passive struts on ADS cars.
  • Lifted or lowered Charger: skip stock-length struts; use coilover or shortened-body struts matched to spring rate, and replace both sides as a pair to avoid uneven damping.

Buying tips

  • Replace struts in pairs (front left + right or rear left + right) and add new upper mounts and bump stops—reusing worn mounts causes clunking and premature strut failure.
  • Match strut to drivetrain: AWD Chargers need AWD-specific front struts; RWD units have different lower clevis and spring perch geometry and will not fit correctly.
  • For ADS-equipped cars, confirm the strut has the solenoid connector and matches OE part number family (5181905AB/5181906AB); passive struts trigger a dash fault and disable adaptive damping.
  • Inspect piston rod diameter and body material: 22–25 mm rods and steel-bodied struts resist bending and corrosion better than thin-rod, painted-carbon units in salt-belt climates.

Specs

Strut TypePassive twin-tube / monotube / electronic ADS
Drivetrain FitmentRWD vs AWD-specific front geometry
Electronic ControlADS solenoid vs passive (no connector)
Piston Rod Diameter20–25 mm steel rod

Related searches

What to check before buying

  • Confirm your Charger's drivetrain (RWD vs AWD) and trim (SE/SXT/R/T vs Scat Pack/SRT/Hellcat) before ordering—strut fitment changes by both.
  • Check for an ADS module or 'Sport' suspension button; if present, you need electronic struts with the correct connector and OE part number match.
  • Measure existing strut length and spring perch height if the car is lowered or lifted; stock-length struts will not correct ride height or alignment.
  • Verify you have new upper mounts, bump stops, and dust boots on hand—reusing old mounts is the leading cause of post-install noise and repeat labor.

FAQ

All Suspension, Steering & Brake Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.