Car Gear Picks

Bds Suspension Lift Buying Guide

BDS Suspension lifts are engineered suspension systems—not body spacers—that raise a vehicle's ride height while correcting steering geometry, brake line length, and driveline angles. The core trade-off is lift height versus component completeness: full 4–6-inch kits replace knuckles, control arms, and driveshafts to preserve OEM geometry, while 2–3-inch spacer or block kits stress stock ball joints and CV axles. The decision rule: buy a kit that includes replacement steering knuckles and extended brake lines for anything above 3 inches, and skip any lift that stacks spacers on factory coil springs.

Lift Height Range:2-6 in (leveling to full suspension)Front Lift Type:Spacer / knuckle / coil springRear Lift Type:Block / add-a-leaf / leaf packShock Included:BDS or Fox monotube, length-matched

At a glance

Price range
Price range not synced yet
Category
Suspension, Steering & Brake Parts
Data updated
Nov 15, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • BDS kits are tiered by lift height: 2-inch leveling kits use strut spacers, 4-inch kits add replacement knuckles and crossmembers, 6-inch kits include new front driveshafts and extended brake lines.
  • Dual-rate coil springs in BDS 4–6-inch kits maintain spring rate under compression, while single-rate spacer lifts cause coil bind and harsh bottoming on IFS trucks.
  • BDS 'GlideRide' leaf spring packs use Teflon-lined inserts between leaves to reduce friction and squeaking versus stock stamped steel packs.
  • Kits ship with Fox or BDS-branded monotube shocks tuned to lift height; reusing stock-length shocks with tall lifts tops out the damper and destroys ride quality.

Best use cases

  • Best fit: daily-driven IFS pickup needing 2–3 inches of lift for 33-inch tires—choose a spacer leveling kit with new upper control arms and extended brake lines; skip full drop-bracket kits that add unnecessary cost and install complexity.
  • Best fit: off-road truck running 35–37-inch tires and 4–6 inches of lift—select a full knuckle-and-crossmember kit with replacement front driveshaft and dual-rate coils; skip block-only rear lifts that axle-wrap under torque.
  • Best fit: Jeep Wrangler JK/JL owner wanting 2.5–3.5 inches for 35s—pick a coil spring lift with adjustable track bars and extended sway bar links; skip budget boost pucks that misalign the front axle and wear out ball joints.

Buying tips

  • Match lift height to tire size: 2 inches clears 33s, 3 inches clears 35s on most IFS trucks, and 4–6 inches is required for 37s—never exceed 3 inches without replacement knuckles or drop brackets.
  • Require extended brake lines and a replacement front driveshaft in any kit above 4 inches; stock lines rupture at full droop and stock shafts bind at the transfer case.
  • Check coil spring rate in lb/in: dual-rate springs (e.g., 500/650 lb/in progressive) resist sag under load, while single-rate spacers transfer all stress to the factory coil.
  • Confirm shock valving matches lift height—BDS kits pair 2-inch lifts with stock-travel monotubes and 6-inch lifts with longer-body Fox 2.0 shocks; mixing lengths causes top-out and poor damping.

Specs

Lift Height Range2-6 in (leveling to full suspension)
Front Lift TypeSpacer / knuckle / coil spring
Rear Lift TypeBlock / add-a-leaf / leaf pack
Shock IncludedBDS or Fox monotube, length-matched

Related searches

What to check before buying

  • Measure your fender-to-ground height and current tire diameter before ordering—lift height is calculated from stock, so a previously leveled truck needs the difference, not the full advertised lift.
  • Verify your truck's driveline type (IFS vs solid axle) and rear suspension (leaf spring vs coil)—BDS kits are vehicle-specific and a leaf-spring kit will not fit a coil-spring rear.
  • Check wheel backspacing: lifts wider than 3 inches typically require 4.5 inches or less of backspacing to clear the knuckle and sway bar at full lock.
  • Confirm brake line and ABS wire length in the kit box—if the kit reuses stock lines above 4 inches of lift, budget for extended stainless lines separately.

FAQ

All Suspension, Steering & Brake Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.