Rv Electric Water Heater Buying Guide
An RV electric water heater is a 120V AC or dual 120V/propane appliance that supplies hot water on shore power without burning LP gas. The core trade-off is element wattage versus amperage draw: higher-wattage elements heat faster but consume most of a 30A pedestal's spare capacity, while lower-wattage units run safely on 15A/20A campsite circuits but recover slowly. Choose a unit whose tank capacity and recovery rate match your shower and dishwashing cadence; skip oversized 240V residential-style elements and undersized 6-gallon tanks for full-time use.
At a glance
- Price range
- Price range not synced yet
- Category
- RV Water & Plumbing
- Data updated
- Nov 15, 2026
Current offers
Highlights
- Element wattage drives recovery: 1500W at 120V draws 12.5A and recovers roughly 6 gal/hr; 2000W draws 16.7A and needs a 20A circuit.
- Tank capacity tiers separate use cases: 6-gallon suits one or two quick showers; 10-12 gallon units sustain consecutive showers and dishwashing.
- Combination electric/propane (DSI) models run on 120V AC at camp and LP gas off-grid, eliminating the single-source limitation of pure electric units.
- Tank material governs lifespan: porcelain/glass-lined steel with an anode rod outlasts aluminum tanks; stainless steel resists corrosion but costs more.
Best use cases
- Full-time campground living with 30A service: pick a 10-12 gallon dual electric/propane unit with a 1500W element to stay within pedestal amperage while retaining LP backup.
- Weekend boondocking and partial hookups: choose a 6-gallon combination DSI unit; a pure 120V electric heater is the wrong fit because it cannot run without shore power.
- Older 15A/20A campsite pedestals: select a 1500W-or-lower element model; a 2000W+ element will trip the breaker and is the wrong choice.
- Cold-climate shoulder-season use: specify a unit with a heated or insulated tank compartment and an anode rod; uninsulated aluminum-tank heaters lose heat and corrode faster.
Buying tips
- Match element wattage to circuit amperage: 1500W/12.5A works on 15A and 20A circuits; 2000W/16.7A requires a dedicated 20A circuit; never exceed 80% of breaker rating.
- Size the tank by occupancy: 6 gallons for 1-2 people with quick showers, 10 gallons for 3-4 people, 12+ gallons for full-time families or dishwashing-heavy use.
- Choose porcelain-lined steel tanks with a replaceable magnesium or aluminum anode rod over bare aluminum for longer service life and easier maintenance.
- Specify a combination electric/propane (DSI) model when you split time between hookups and boondocking; pure electric is only appropriate for permanent shore-power use.
Specs
| Heating Source | 120V AC electric / dual LP-electric |
|---|---|
| Element Wattage | 1500W (12.5A) to 2000W (16.7A) |
| Tank Capacity | 6 / 10 / 12 gallon |
| Tank Material | Porcelain-lined steel / stainless / aluminum |
Related searches
What to check before buying
- Measure the heater bay: most 6-gallon units need roughly 13x13x17 in, while 10-12 gallon tanks require a larger cutout; verify depth and door clearance before ordering.
- Confirm the pedestal breaker and receptacle type: 30A RV service uses a TT-30 plug; a 15A/20A household-style outlet limits you to 1500W elements.
- Check plumbing connections: most units use 1/2 in NPT or 3/4 in NPT fittings and a pressure-relief valve; confirm your PEX or braided line adapters match.
- Verify the unit includes or accepts a pressure-relief valve and drain plug, and that the anode rod is accessible for annual replacement.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
