Vw Side Mirror Buying Guide
A VW side mirror is a vehicle-specific assembly combining the mirror glass, power-fold/adjust motors, turn-signal repeater, and heated defrost element, so the primary trade-off is OEM-level connector and housing compatibility versus universal or aftermarket parts that may fit physically but fail electrically. The clear rule: match the mirror by VW platform code (MK7, MQB, B8, etc.), side, and feature set (heated, power-fold, blind-spot) before buying; if the connector pinout and housing mount are not confirmed by VW part number, skip the part.
At a glance
- Price range
- Price range not synced yet
- Category
- Body, Interior & Hardware Parts
- Data updated
- Nov 16, 2026
Current offers
Highlights
- VW mirrors are platform-specific: MK7 Golf uses 5G0 857 507/508 base numbers, while MQB evo (MK8) mirrors add different cap and repeater shapes.
- Power-fold mirrors require a door control module (e.g., 5Q0 959 593) that supports folding; non-fold cars often lack the wiring pins and coding.
- Heated mirror glass uses two spade terminals and a resistive grid; aftermarket glass with 2-pin connectors is standard, but heated function needs the door harness to supply 12V on the defrost circuit.
- OEM mirror caps are ABS with UV-stabilized paint; cheaper aftermarket caps often use brittle PP that fades and cracks under UV within a few seasons.
Best use cases
- Best fit: direct replacement of a cracked/smashed mirror on a VW with power-fold and puddle light — buy a complete used OEM assembly with matching part number to preserve coding and connectors.
- Best fit: base-model VW with manual-fold, non-heated mirrors — a standalone aftermarket glass and cap kit is sufficient and avoids paying for unused motors.
- Wrong fit: upgrading a non-power-fold car to power-fold — skip unless you also buy the door module, harness, switch, and VCDS coding; the mirror alone will not fold.
- Wrong fit: using a universal stick-on mirror on a VW with blind-spot radar — skip, because the radar antenna sits behind the mirror housing and stick-on glass can block or misalign the sensor.
Buying tips
- Confirm the VW part number stamped on the original mirror housing (e.g., 5G0 857 507) and match all 11 digits, including the letter suffix for color and features.
- Count the connector pins: 2-pin = heated glass only; 6-pin = power adjust + heated; 8-pin or more = power-fold and/or turn signal and/or camera.
- For MK7 Golf, mirror glass is 2-pin heated with a specific curvature; buying a flat aftermarket glass creates a blind spot and fails inspection in some regions.
- If replacing a mirror with a turn-signal repeater, verify the housing has the clear lens cutout and the 3-pin repeater connector; base housings lack the cutout.
Specs
| Mirror Features | Heated / Power-fold / Turn signal / Blind-spot |
|---|---|
| Connector Pins | 2-pin (heat) to 8-pin (fold + signal) |
| VW Platform Code | MK7 / MQB / PQ35 / B8 — match part number |
| Housing Material | OEM ABS vs aftermarket PP (UV fade) |
Related searches
What to check before buying
- Measure the mirror glass width and height (e.g., ~175mm x 110mm for MK7 Golf) and match the backing plate clip pattern before ordering.
- Check your door harness for the power-fold connector: if the 8-pin plug is absent, power-fold mirrors will not function without a harness retrofit.
- Confirm the mirror cap finish code (primed, textured black, or painted) matches your car's color code; painted caps require a body-shop mix.
- Verify the mirror mount triangle bolt pattern (3-bolt is common, but MQB vs PQ35 differ) against your door frame before purchase.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
