Car Gear Picks

Toyota Side Mirror Replacement Buying Guide

Toyota side mirror replacement covers entire power-folding, heated, turn-signal, and blind-spot-monitor assemblies for sedans, SUVs, and trucks—not just the glass. The core trade-off is OEM-grade housing plastic and connector pinouts versus generic aftermarket arms with weaker motors and missing hardware. Buy OEM or a CAPA-certified assembly when the mirror carries cameras, heating, or BSM; use a plain 5-pin power mirror only on base trims with no electronic features.

Connector Pinout:3 / 5 / 7 / 10+ pin by featureHousing Material:OEM PA66-GF30 vs aftermarket ABSMirror Functions:Power / Heat / Fold / Turn / BSM / CameraGlass Curvature:Convex passenger / flat-aspheric driver

At a glance

Price range
Price range not synced yet
Category
Body, Interior & Hardware Parts
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Toyota mirrors split into 3, 5, 7, and 10+ pin connectors; pin count dictates power fold, heat, turn signal, and BSM/camera support.
  • OEM housings use PA66-GF30 glass-filled nylon and stamped steel internal brackets; generic units often use ABS and thinner pivots that crack.
  • Heated mirrors draw 2-4A through a dedicated relay circuit—non-heated replacements lack the heating grid and wiring pins.
  • Power-folding motors add a second control module; base power mirrors use a single 5-pin connector with no fold logic.

Best use cases

  • Pick a full OEM or CAPA-certified assembly with matching pin count if your mirror has heat, turn signal, BSM, or 360 camera—partial glass-only fixes skip broken motor and housing damage.
  • Choose a plain 5-pin power mirror only for base LE/L trims with manual fold and no heat; skip any assembly with extra pins you cannot wire.
  • Buy a painted or primed housing cap separately when only the cover is cracked; replacing the whole assembly wastes working motors and glass.
  • Match left/right and driver/passenger side exactly—Toyota mirrors are not interchangeable between sides even when the shape looks mirrored.

Buying tips

  • Count the pins in your original mirror connector: 3 pins = manual/power glass only, 5 = power glass + heat, 7+ = fold/turn/BSM/camera.
  • Match the Toyota part number on the mirror base or door harness sticker; 87940/87910 prefixes differ by side and feature set.
  • Verify glass curvature: convex on passenger side (marked 'OBJECTS IN MIRROR ARE CLOSER'), flat or aspheric on driver side per region.
  • For BSM-equipped models, the mirror must include the radar indicator LED and matching 2-pin sub-connector or the system throws a fault.

Specs

Connector Pinout3 / 5 / 7 / 10+ pin by feature
Housing MaterialOEM PA66-GF30 vs aftermarket ABS
Mirror FunctionsPower / Heat / Fold / Turn / BSM / Camera
Glass CurvatureConvex passenger / flat-aspheric driver

Related searches

What to check before buying

  • Measure the triangular sail mounting footprint and door cutout; Camry, RAV4, and Tacoma mounts differ even within the same generation.
  • Confirm voltage and plug standard: all Toyota 12V negative-ground, but connector keying changes between Tundra (2007-2021) and (2022+).
  • Check whether your trim has power fold—if the door switch lacks a fold button, a folding mirror will not actuate without added wiring.
  • Verify paint code on the door jamb sticker before ordering a painted cap; primed caps require body-shop paint matching.

FAQ

All Body, Interior & Hardware Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.