Tesla Model 3 Side Mirror Replacement Buying Guide
Tesla Model 3 side mirror replacement covers the exterior mirror assembly, glass, and internal motor/heater modules for 2017–2023 Model 3 and 2024+ Highland cars. The core trade-off is between genuine OEM assemblies with correct autofold/dimming wiring versus aftermarket glass and housings that often skip the connector pins and heating element. Buy OEM or a verified plug-and-play assembly for cars with power-folding and auto-dimming; use aftermarket glass only for a simple heated non-folding mirror.
At a glance
- Price range
- Price range not synced yet
- Category
- Body, Interior & Hardware Parts
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Pre-Highland Model 3 (2017–2023) uses a 3-pin or 8-pin connector depending on folding/dimming; Highland (2024+) changed the housing shape and connector, so assemblies are not cross-compatible.
- Power-folding and auto-dimming are separate options: base cars have heated glass only, while Long Range/Premium builds add folding motors and electrochromic dimming glass with extra pins.
- OEM mirror glass is typically 3–4 mm thick with a bonded heating grid and blind-spot etched line; cheap aftermarket glass often measures 2 mm and lacks the dimming layer.
- The mirror housing clips to a cast aluminum base with three T30 Torx bolts; replacement assemblies must include the correct base plate or the original must be transferred.
Best use cases
- Best fit: 2017–2023 Model 3 with cracked glass only — buy OEM-spec heated glass with the correct connector pin count and reuse the original housing and motor.
- Best fit: 2024+ Highland Model 3 with a damaged housing — buy a Highland-specific assembly with the new connector; pre-Highland assemblies will not fit the door or wiring.
- Wrong fit: buying a non-folding aftermarket assembly for a car with power-folding — the folding motor and wiring will be missing, and the car will throw a mirror fault.
- Skip aftermarket dimming glass for cars without auto-dimming: the electrochromic layer requires a powered harness that base trims do not have.
Buying tips
- Count the pins in the original mirror connector: 3 pins = heated only, 8 pins = heated + folding + dimming; match the replacement assembly to that pin count.
- Measure the glass diagonal before ordering: pre-Highland glass is roughly 17–18 cm; Highland glass is slightly wider and will not seat in the older housing.
- Check whether the assembly includes the aluminum base plate and T30 bolts; if not, reuse the original base and torque bolts to about 9 Nm.
- For paint-matched caps, order the cap separately by Tesla paint code (e.g., Pearl White PPSW, Deep Blue Metallic PPSB) rather than relying on aftermarket color names.
Specs
| Model Year Fit | 2017-2023 vs 2024+ Highland |
|---|---|
| Connector Pins | 3-pin heated / 8-pin folding+dim |
| Glass Features | Heated / electrochromic / blind-spot |
| Mounting Base | Cast aluminum, 3x T30 Torx |
Related searches
What to check before buying
- Confirm model year and trim: 2017–2023 pre-Highland versus 2024+ Highland have different housing shapes and connectors.
- Verify options on the car: power-folding, auto-dimming, and heated glass are separate; match the replacement to the original pin count.
- Check the door harness connector type at the mirror base; some early 2017–2018 cars use a different latch and pin layout.
- Confirm whether the replacement includes the mirror cap and base plate; if not, plan to transfer the original painted cap and T30 base.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
