Car Gear Picks

Subaru Side Mirror Replacement Buying Guide

A Subaru side mirror replacement restores the critical side-rear sightline and must match the vehicle's exact generation, mirror family (power, heated, turn-signal, blind-spot), and connector pinout. The main trade-off is between a complete painted assembly with OEM-grade motor/clips and a cheaper bare-glass or CAPA-certified housing that may not fit harnesses or retain weather sealing. The decision rule: match the mirror's part-family code and connector to your VIN's build date; buy a full assembly with harness and glass for any power/heat/BSM feature, and reserve bare glass or cover-only parts for purely mechanical, non-heated base mirrors.

Mirror Features:Manual / Heated / Power-fold / BSMConnector Pin Count:3 / 5 / 7 / 10 pins (feature-dependent)Housing Material:OEM ABS vs CAPA-certified ABSGlass Curvature:Convex/aspheric passenger vs flat

At a glance

Price range
Price range not synced yet
Category
Body, Interior & Hardware Parts
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Subaru mirrors are generation-specific: GD/GR Impreza (2002–2007) vs GR/GV (2008–2014) vs VA WRX (2015+) use different mounts and harnesses; the mirror family code on the housing must match.
  • Power-fold, heated, turn-signal, and blind-spot-monitor (BSM) mirrors use distinct connector pin counts (typically 3, 5, 7, or 10 pins); a lower-pin mirror cannot be upgraded by splicing alone.
  • OEM mirrors use glass with specific convex/aspheric curvature on the passenger side; aftermarket flat glass changes the field of view and is not equivalent.
  • CAPA-certified aftermarket assemblies are validated for fit and finish but may use lower-grade fold motors and thinner housing plastic than OEM; OEM is preferred for BSM and power-fold longevity.

Best use cases

  • Best fit: 2015+ WRX/STI with power-fold and turn-signal — buy the full painted assembly with the correct 7- or 10-pin harness; skip bare-glass kits because fold and signal circuits live in the housing.
  • Best fit: 2008–2014 Impreza with manual, non-heated mirrors — a bare-glass replacement or manual assembly is sufficient and cheapest; skip full power assemblies if no motor or heat exists.
  • Best fit: 2019+ Forester/Ascent with BSM — use OEM or CAPA-certified full assembly with the BSM module bracket and correct pinout; wrong-fit: generic mirror without BSM mounting points, which disables the warning system.
  • Wrong fit: Crosstrek/Outback with heated mirrors in cold climates — do not buy non-heated glass; the defroster grid and two extra pins are required and cannot be added to a non-heated housing.

Buying tips

  • Match the mirror family code stamped on the housing (e.g., a 3-character code) and the connector pin count before ordering; VIN alone can span mid-year harness changes.
  • Measure the mirror mounting triangle footprint and bolt spacing (typically 3 bolts) — GD-era and VA-era mounts differ by several millimeters and do not interchange.
  • For paint-match, order by Subaru color code (e.g., 02C, 61K, D4S) on the door jamb plate; pre-painted CAPA caps match OEM codes but may vary in flake orientation.
  • Choose OEM for power-fold and BSM mirrors (motor and module longevity); choose CAPA-certified for non-fold, non-BSM cosmetic replacement to save cost with acceptable fit.

Specs

Mirror FeaturesManual / Heated / Power-fold / BSM
Connector Pin Count3 / 5 / 7 / 10 pins (feature-dependent)
Housing MaterialOEM ABS vs CAPA-certified ABS
Glass CurvatureConvex/aspheric passenger vs flat

Related searches

What to check before buying

  • Confirm your Subaru's generation and build date (door jamb sticker) and the mirror family code on the existing housing before selecting a replacement tier.
  • Count the wires/pins in the mirror connector and note features: heat, power-fold, turn signal, BSM — every feature must exist in the replacement or it won't function.
  • Verify paint code from the VIN plate and decide pre-painted vs paint-to-match; unpainted black texture is only correct for base trims.
  • Check that the replacement includes the mounting gasket, bolts, and glass; missing gaskets cause wind noise and water intrusion.

FAQ

All Body, Interior & Hardware Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.