Nissan Sentra Side Mirror Buying Guide
A Nissan Sentra side mirror is a vehicle-specific exterior assembly that combines a mirror glass, housing, and often a power motor or turn-signal repeater. The core trade-off is between factory-style OEM or CAPA-certified replacements with correct connectors and heating elements versus generic aftermarket units that may lack plug-and-play wiring or UV-stable housings. The decision rule: match the exact generation, side, and feature set (power, heated, turn-signal, blind-spot) before considering cosmetic differences.
At a glance
- Price range
- Price range not synced yet
- Category
- Body, Interior & Hardware Parts
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Sentra generations differ sharply: B15 (2000-2006) uses simple manual or power mirrors; B16 (2007-2012) added integrated turn signals on upper trims; B17 (2013-2019) uses a different door connector; B18 (2020+) includes blind-spot monitoring on SV/SR.
- Power mirrors use a 3-wire or 5-wire harness depending on fold and heat functions; non-heated units have 2 wires. Confirm pin count and connector shape before ordering.
- CAPA-certified aftermarket mirrors meet fit and finish standards for housing and glass curvature; non-certified units often have distorted glass and UV-yellowing housings within 2 years.
- Heated mirrors use a resistive grid drawing 1-2 amps; turn-signal repeaters use LED strips on B17/B18 trims. Base S trims often lack both features and use a plain black housing.
Best use cases
- Best fit: 2013-2019 Sentra SV/SR with power heated mirrors and turn signals — order a CAPA-certified unit with 5-pin connector and LED repeater.
- Best fit: 2000-2006 Sentra base model with manual mirrors — a simple 2-bolt manual replacement housing is sufficient; skip power and heat options.
- Wrong fit: 2020+ Sentra with blind-spot monitoring — do not buy a base mirror; the radar module and 8-pin connector are required and only OEM or specific aftermarket units support it.
- Wrong fit: mixing left and right mirror glass curvature — driver side is flat or slightly convex, passenger side is convex; swapping causes distorted distance judgment.
Buying tips
- Match the generation and side: B15 (2000-2006), B16 (2007-2012), B17 (2013-2019), B18 (2020+). The door cutout and mounting stud pattern differ between each.
- Count connector pins: 2 pins = power adjust only; 3 pins = power + heated; 5 pins = power + heated + turn signal; 8 pins = blind-spot monitoring. Buying the wrong pin count means no plug-and-play.
- Choose CAPA-certified or OEM for glass curvature and housing UV stability; unbranded units often use flat glass that distorts and ABS plastic that chalks within 18 months.
- For manual mirrors, verify the 3-bolt triangular mounting plate pattern; for power mirrors, confirm the mirror includes the motor and the door harness pigtail.
Specs
| Generation Fit | B15/B16/B17/B18 by year |
|---|---|
| Connector Pins | 2 / 3 / 5 / 8 pin by feature |
| Glass Type | Driver flat / Passenger convex |
| Certification | OEM or CAPA-certified |
Related searches
What to check before buying
- Measure the door mounting area: B17 and B18 use a triangular 3-stud pattern; B15 and B16 use a different spacing — measure stud center-to-center before ordering.
- Confirm your Sentra's trim level feature set: look at the existing mirror for a heating symbol, turn-signal LED, or blind-spot indicator; match that exact feature set.
- Check the connector shape and pin count on the existing mirror harness inside the door sail panel; photograph it before ordering.
- Verify the mirror glass type: driver side is flat or 1:1 convex, passenger side is convex; heated glass has two terminals on the back.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
