Mazda Cx 5 Side Mirror Buying Guide
The Mazda CX-5 side mirror is a power-folding, heated, turn-signal-equipped assembly whose durability hinges on three factors: OEM vs aftermarket housing plastic grade, motor clutch design, and whether the mirror includes blind-spot monitoring (BSM) and camera wiring. Buyers must match the mirror to their CX-5 generation (KE 2013–2016, KF 2017–2021, KF facelift 2022+) and trim (Sport/Touring/Grand Touring/Signature) because connectors and module protocols differ. The clear decision rule: buy a full assembly with the correct connector count and BSM/camera options for your VIN, not a bare glass or cap, unless you are repairing a single broken component on an otherwise intact housing.
At a glance
- Price range
- Price range not synced yet
- Category
- Body, Interior & Hardware Parts
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Generation split: KE (2013–2016) uses a 3-bolt base and 6-pin connector; KF (2017–2021) uses a 3-bolt base with 8-pin or 10-pin connector; 2022+ KF facelift adds camera and updated BSM module — harnesses are not interchangeable.
- Housing material: OEM mirrors use ASA+PC (acrylic-styrene-acrylonitrile/polycarbonate) for UV and impact resistance; aftermarket ABS housings are cheaper but crack at the fold joint after repeated power-folding cycles.
- Power-folding motor clutch: OEM units use a slip-clutch gear that disengages under manual force; low-cost aftermarket mirrors often omit the clutch, stripping the fold gear if someone pushes the mirror by hand.
- BSM and camera options: Grand Touring/Signature trims include blind-spot monitoring with a radar module in the mirror and a puddle lamp; 2022+ models add a 360° camera in the mirror base — buying a non-BSM mirror for a BSM car triggers a dash warning and disables the system.
Best use cases
- Best fit: 2017–2021 CX-5 owner with a cracked housing but working motor and glass — buy a complete KF assembly with matching connector count and BSM option; skip bare caps unless the housing is undamaged.
- Best fit: 2013–2016 KE owner replacing a failed power-fold motor — choose a KE-specific assembly with the 6-pin connector; do not buy a KF mirror, as the base and wiring differ.
- Best fit: 2022+ KF facelift owner with a broken camera mirror — buy the camera-equipped assembly for the correct side; a non-camera mirror will cause a 360° view fault.
- Wrong fit: buyer wanting to add power folding to a base Sport — the body harness lacks the fold circuit and switch; aftermarket add-on kits require custom wiring and are not plug-and-play.
Buying tips
- Match the connector pin count: count the pins in your existing mirror plug (6 for KE, 8 or 10 for KF, 10+ for 2022+ camera mirrors) and buy an assembly with the identical count — adapters are not reliable.
- Choose housing grade: OEM or OE-equivalent ASA+PC housings survive repeated power-fold cycles; ABS aftermarket housings are acceptable only for non-folding base models.
- Confirm BSM and camera flags: look for the radar icon on the mirror glass and a camera lens in the base; if your car has these, the replacement must include the corresponding module or the system stays offline.
- Buy the full assembly for motor or housing damage; buy bare glass only for cracked glass on an otherwise functional mirror — glass is the only component safely swapped without disconnecting the harness.
Specs
| Generation Fit | KE 2013-16 / KF 2017-21 / KF2 2022+ |
|---|---|
| Connector Pins | 6-pin KE / 8-10-pin KF / 10+ camera |
| Housing Material | ASA+PC OEM vs ABS aftermarket |
| Features | Power-fold, heated, BSM, camera |
Related searches
What to check before buying
- Record your VIN and generation (KE 2013–2016, KF 2017–2021, KF facelift 2022+) — the mirror base bolt pattern and connector change between generations.
- Measure the mirror base footprint and confirm 3-bolt mounting; verify the replacement includes the correct triangular sail panel and gasket.
- Check your trim for BSM (radar icon on glass) and 360° camera (lens in mirror base); order a mirror with the same features.
- Confirm voltage and plug standard: all CX-5 mirrors are 12V negative-ground; the connector keying differs by generation, so test-fit the plug before fully seating the mirror.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
