Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Hyundai Elantra Window Regulator Buying Guide

A Hyundai Elantra window regulator is the cable-and-motor or scissor-lift assembly that moves the door glass up and down; the core trade-off is between OEM-style metal-reinforced carriers with sealed motors and cheap all-plastic carriers that warp and strip within a season. Buy the regulator matched to your Elantra generation, door position, and motor connector style—skip generic 'fits all' listings that ignore body-code differences.

Body Code Fit:HD 2007-10 / MD 2011-13 / UD 2014-16Carrier Material:Glass-filled nylon vs unfilled plasticDrive Type:Cable front / scissor rear sedanMotor Plug:2-pin vs 6-pin by trim/year
Typical price range$113.99

At a glance

Category
Body, Interior & Hardware Parts
Data updated
Nov 16, 2026

Current offers

Highlights

  • Fourth-gen (2007–2010) and fifth-gen (2011–2016) Elantra regulators are not interchangeable; coupe, sedan, and touring bodies also use different rear-glass carriers.
  • Front regulators are cable-driven with a plastic pulley carrier; rear regulators on sedans often use a scissor-lift arm, so front and rear parts never swap.
  • OEM-style units use glass-filled nylon carriers with steel-reinforced tracks; budget units use unfilled plastic that deforms under summer heat and binds the glass.
  • Motor connector style splits into 2-pin and 6-pin harnesses by trim and year—matching the plug avoids splicing and keeps the auto-up/down function working.

Best use cases

  • Best fit: 2011–2016 Elantra sedan with a dead front-left window—choose the front-left cable regulator with the 2-pin motor plug and steel track; skip rear scissor units.
  • Best fit: 2007–2010 Elantra with slow or grinding glass—replace the complete regulator-plus-motor assembly rather than the motor alone, since worn cables kill new motors.
  • Wrong fit: 2017+ Elantra (sixth/seventh gen) owners—those doors use a different bolt pattern and connector; do not force a 2011–2016 unit onto the newer shell.
  • Wrong fit: Coupe or Touring owners buying a sedan rear regulator—coupe quarter-glass carriers are shorter and will not align with sedan bolt holes.

Buying tips

  • Match body code first: HD (2007–2010), MD (2011–2013), and UD (2014–2016) each carry distinct regulator part numbers even when the glass looks identical.
  • Pick glass-filled nylon carriers over plain plastic—reinforced carriers resist heat warp and keep the cable pulley aligned through thousands of cycles.
  • Buy the assembly with motor included when the old unit grinds or stalls; a new motor on a worn cable track fails within weeks.
  • Confirm the harness plug pin count (2-pin vs 6-pin) and whether your trim has auto-up; the wrong plug disables express function even if the glass moves.

Specs

Body Code FitHD 2007-10 / MD 2011-13 / UD 2014-16
Carrier MaterialGlass-filled nylon vs unfilled plastic
Drive TypeCable front / scissor rear sedan
Motor Plug2-pin vs 6-pin by trim/year

Related searches

What to check before buying

  • Record your VIN or door tag body code (HD, MD, UD) and door position—front-left, front-right, rear-left, rear-right—before ordering.
  • Measure the glass run channel: a warped plastic carrier often means the channel felt is worn and should be replaced with the regulator.
  • Check the door harness connector pin count and keyway shape against the new unit's plug; adapters are not reliable for window motors.
  • Inspect the door shell bolt holes for elongation—stripped mounting points require nut-serts before any new regulator will hold alignment.

FAQ

All Body, Interior & Hardware Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.