Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Honda Side Mirror Replacement Buying Guide

Honda side mirror replacement covers exact-fit assemblies, glass-only repairs, and powered upgrades across Civic, Accord, CR-V, Odyssey, and Fit generations. The primary trade-off is between OEM-grade powered/heated assemblies with factory connectors versus universal or partial-fit mirrors that often lack camera, turn-signal, or defrost circuits. Buy by matching the Honda part number and connector type to your VIN, not by year-range claims alone.

Mirror Type:Full assembly vs glass-onlyConnector Pins:3-pin power / 5-7 pin heat-signalGlass Curvature:Convex RH / Flat LHHousing Material:ABS plastic + metal bracket
Typical price range$80.99 – $249.99

At a glance

Category
Body, Interior & Hardware Parts
Data updated
Nov 16, 2026

Current offers

Highlights

  • OEM Honda mirrors use generation-specific connectors: 2014-2017 Odyssey RH mirrors with camera use a multi-pin plug that aftermarket base mirrors omit.
  • Civic/Accord 10th-gen mirrors integrate turn-signal LEDs and heating grids; base trims use 3-wire power while EX/LX/Sport trims add 5-7 pin harnesses.
  • Housing material is typically ABS plastic with metal internal brackets; glass-only replacements use adhesive-backed heated grids on EX/LX/Sport trims.
  • Part numbers like 76208T5RA01 encode side, trim, and features - the suffix determines camera, heat, and signal compatibility.

Best use cases

  • Best fit: exact OEM part-number match (e.g., 76208T5RA01 for 2015-2020 Fit EX/LX/Sport RH) when powered, heated, or camera functions must be retained.
  • Best fit: glass-and-backing replacement only when the motor and housing are intact and the fault is cracked or delaminated mirror glass.
  • Wrong fit: universal clamp-on or year-range-only mirrors on trims with cameras, turn signals, or defrost - these will not connect to factory harnesses.
  • Skip aftermarket base mirrors on Odyssey Touring/Elite with camera - the camera feed and multi-pin connector are not replicated.

Buying tips

  • Match the 11-digit Honda part number stamped on the back of the original mirror housing, not just the model year range.
  • Count the pins in the factory connector: 3-pin is power-only, 5-7 pin adds heat/signal, 8+ pin indicates camera or auto-dimming.
  • For heated mirrors, confirm the replacement glass includes the resistive grid and two terminal tabs; unheated glass will not defrost.
  • Check mirror glass curvature: OEM convex (right side) vs flat (left side) - installing flat glass on the passenger side reduces field of view.

Specs

Mirror TypeFull assembly vs glass-only
Connector Pins3-pin power / 5-7 pin heat-signal
Glass CurvatureConvex RH / Flat LH
Housing MaterialABS plastic + metal bracket

Related searches

What to check before buying

  • Verify your VIN's trim level (LX, EX, Sport, Touring) - mirror features vary by trim even within the same model year.
  • Measure the factory mirror housing footprint and mounting bolt pattern (typically 3 bolts) before ordering an assembly.
  • Confirm whether your Honda has blind-spot camera (Odyssey, CR-V Touring) - camera mirrors require the matching harness.
  • Check voltage: Honda mirrors are 12V DC; confirm the replacement motor is 12V and not a 24V commercial variant.

FAQ

All Body, Interior & Hardware Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.