Photos from current listings. Actual item, color, and included accessories may vary.
Honda Odyssey Side Mirror Replacement Buying Guide
Side mirror replacement for the Honda Odyssey spans eight model years across four generations, and the primary trade-off is between OEM salvage/certified assemblies and aftermarket units that may lack power-folding, heating, or camera wiring. The decision rule: match the exact generation, side (LH/RH), mirror features (power, heated, turn signal, camera), and connector pinout before buying—any mismatch in camera harness or memory module renders the mirror non-functional.
At a glance
- Category
- Body, Interior & Hardware Parts
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Generation splits: 1999-2004 (2nd gen), 2005-2010 (3rd gen), 2011-2017 (4th gen), 2018-2024 (5th gen) — mirrors are not cross-compatible between generations.
- 2014-2017 Odyssey RH passenger mirrors with camera use a dedicated coaxial/video connector for the LaneWatch camera; non-camera mirrors use a 3-6 pin power connector.
- Power-folding and heated mirror functions require the corresponding door harness and switch; base models may have blank connectors in the door loom.
- OEM salvage mirrors retain factory glass curvature and motor gearing; aftermarket units vary in glass flatness and motor lifespan, typically 6-18 months vs 5+ years for OEM.
Best use cases
- Best fit: 2014-2017 Odyssey EX/EX-L/Touring with LaneWatch camera — buy a used OEM RH mirror with camera and matching connector; skip aftermarket camera mirrors that require re-pinning.
- Best fit: 2005-2010 Odyssey LX/EX without camera — a direct-fit aftermarket power mirror (3-pin or 5-pin) is cost-effective; skip heated/folding units unless the door harness has the extra pins.
- Wrong fit: Buying a 2018+ mirror for a 2014-2017 body — mounting studs, sail panel shape, and connector are different; do not attempt to swap housings or splice harnesses.
Buying tips
- Count the connector pins on your existing mirror: 3-pin = power only, 5-pin adds heated, 6-pin adds turn signal, plus a separate coax/video plug for camera-equipped 2014-2017 models.
- Check the door harness plug for unused cavities: if the body-side connector has fewer pins than the mirror, power-folding or heat will not work without adding wiring.
- For 2014-2017 LaneWatch models, the RH mirror camera is not plug-and-play with non-camera body harnesses — the display head unit must support the camera input.
- Match the mirror glass type: heated mirrors use a two-terminal grid on the back of the glass; non-heated replacements will not accept the heated plug.
Specs
| Generation Fitment | 2nd 1999-04 / 3rd 05-10 / 4th 11-17 / 5th 18-24 |
|---|---|
| Mirror Features | Power / Heated / Turn signal / Camera |
| Connector Pins | 3-pin power, 5-6 pin + coax for camera |
| Mounting Pattern | 3-stud sail panel, generation-specific spacing |
Related searches
What to check before buying
- Verify your Odyssey model year and trim (LX, EX, EX-L, Touring) against the mirror's listed fitment — trim determines camera and folding features.
- Measure the mounting footprint: 2011-2017 RH mirrors use a three-stud pattern on the door sail; 2005-2010 uses a different stud spacing.
- Inspect the door harness connector color and cavity count before ordering — photograph it and compare to the mirror's pigtail.
- Confirm the mirror housing color code matches your van's paint code (e.g., NH731P, NH797M) for a factory-match finish; unpainted black primed units require painting.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.

