Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Honda Accord Bumper Buying Guide

The Honda Accord bumper is a model-specific exterior body panel, with fitment dictated by generation (9th, 10th, 11th), trim level (Sport, EX-L, Touring), and sensor/camera cutouts. The core trade-off is between OEM-grade thermoplastic olefin (TPO) covers with exact park-sensor and radar apertures versus flexible aftermarket covers or fiberglass kits that may not align with factory mounting points. Buy only a part keyed to your exact chassis code and trim—anything sold as "universal fit" or without trim-year ranges will require bodywork to mount.

Generation Fitment:9th 2013-17 / 10th 2018-22 / 11th 2023+Material Type:TPO plastic / fiberglass / polyurethaneTrim Specificity:Sport/Touring vs LX/EX cutouts differSensor Compatibility:Honda Sensing radar / park-sensor cutouts
Typical price range$367.99

At a glance

Category
Body, Interior & Hardware Parts
Data updated
Nov 16, 2026

Current offers

Highlights

  • Factory Accord covers are TPO (thermoplastic olefin)—a flexible, impact-resistant plastic; fiberglass and polyurethane lip kits are stiffer and crack more easily but accept paint and aero shaping.
  • 10th-gen Accords (2018–2022) split bumpers by trim: Sport/Touring get different grille and fog-light cutouts than LX/EX—front covers are not interchangeable across trims without swapping grille and trim pieces.
  • Accord bumpers from 2018+ include cutouts and brackets for Honda Sensing (radar behind the front emblem, camera at the windshield, parking sensors in the cover)—buy a cover with the right sensor holes or drill and recalibrate.
  • Rear bumper diffuser and corner-apron spats (like Yofer V2-style kits for 2018–2020 10th-gen) are add-on lip components, not replacement covers—they bolt or tape to the factory bumper and are vehicle-generation specific.

Best use cases

  • Collision repair on a daily driver: buy a CAPA-certified or OEM replacement cover for your exact year/trim with pre-cut sensor holes—skip fiberglass or "aero" covers, which fit poorly and lack sensor apertures.
  • Cosmetic upgrades on a 2018–2020 10th-gen Accord: a rear diffuser plus corner spats is the right pick if you want an aggressive look without replacing the whole bumper—skip full widebody or universal lip kits that require cutting the factory cover.
  • Front-end refresh on a 10th-gen Sport or Touring: match the cover to the trim-specific grille and fog-light housings—skipping this means buying a base-model cover that leaves gaps around the grille and fog lamps.

Buying tips

  • Confirm your chassis code and trim before ordering: 10th-gen Accords run 2018–2022, and front covers differ between Sport/Touring and LX/EX due to grille and fog-light shapes—order by VIN or exact trim/year, not just "Accord."
  • For a replacement cover, choose TPO or CAPA-certified plastic over fiberglass: TPO flexes on impact and holds factory clips; fiberglass is rigid, heavier, and prone to stress cracks at mounting points.
  • If your car has Honda Sensing and parking sensors, buy a cover with the correct sensor cutouts and plan for radar/camera recalibration after installation—drilling a plain cover risks misaligned sensors and warning lights.
  • For lip and diffuser add-ons, match the part to your generation (e.g., 10th-gen 2018–2020 Yofer-style kits) and check whether it uses self-tapping screws, adhesive tape, or factory bolt points—tape-only kits are the least durable at speed.

Specs

Generation Fitment9th 2013-17 / 10th 2018-22 / 11th 2023+
Material TypeTPO plastic / fiberglass / polyurethane
Trim SpecificitySport/Touring vs LX/EX cutouts differ
Sensor CompatibilityHonda Sensing radar / park-sensor cutouts

Related searches

What to check before buying

  • Verify your exact model year, trim, and chassis code (e.g., 10th-gen 2018–2022) against the part's fitment list—bumpers are not cross-compatible between generations or trims with different grilles.
  • Inspect your car for parking sensors, fog lights, and Honda Sensing radar behind the front emblem; the replacement cover must have matching cutouts or you must transfer/calibrate the sensors.
  • Check whether the part is a full replacement cover, a cover skin, or an add-on lip/spat—each mounts differently and requires different hardware (clips, brackets, tape, or screws).
  • Plan for paint: unpainted covers need a body shop to prep, prime, and color-match; pre-painted options only match factory color codes exactly if the seller confirms your code.

FAQ

All Body, Interior & Hardware Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.