Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Ford F 150 Side Mirror Buying Guide

Ford F-150 side mirrors are vehicle-specific glass, bracket, and motor assemblies that restore visibility and safety after damage or upgrade base trims to towing and blind-spot features. The primary trade-off is OEM-grade fitment and connector compatibility versus aftermarket glass-only or universal assemblies that can leak or misalign. The decision rule: match the exact cab generation (2013–14 vs 2015–21), side, and factory options (heat, turn signal, BLIS, camera) before choosing between a glass replacement and a full assembly.

Generation Fit:2013-14 (12th) vs 2015-21 (13th)Mirror Type:Glass-only vs full assemblyHeated Option:2 terminals + dash defrost buttonMount Pattern:3-bolt standard / 4-bolt towing
Typical price range$37.99 – $130.99

At a glance

Category
Body, Interior & Hardware Parts
Data updated
Nov 16, 2026

Current offers

Highlights

  • Mirror glass-only replacements reuse the existing motor and housing; full assemblies include the bracket, motor, and often the turn-signal or puddle lamp wiring.
  • Generation break: 2013–14 trucks use a different door harness and mirror foot than 2015–21 aluminum-body trucks, so assemblies are not cross-compatible.
  • Heated glass uses two spade terminals on the back; unheated glass has none, so verify your truck's factory defrost button before ordering.
  • Towing mirrors extend 2–3 inches wider and require the corresponding door reinforcement bracket; standard mirrors bolt to the same three-bolt pattern.

Best use cases

  • Best fit: 2015–21 F-150 with cracked glass and working motors — buy heated glass only for the correct side; skip full assemblies to save installation time.
  • Best fit: 2013–14 XLT/FX4 with a broken housing or failed fold motor — buy the full assembly keyed to 8L3Z17683EA for the driver side and reuse the factory harness.
  • Wrong fit: buying a 2015–21 assembly for a 2013–14 truck — the door connector and mirror foot differ; skip and match the generation first.
  • Wrong fit: ordering heated glass for a truck without the rear-defrost button — the terminals stay dead; skip and buy unheated glass or add the switch.

Buying tips

  • Identify the cab generation by VIN year: 2013–14 (12th gen) vs 2015–21 (13th gen) — mirror footprints and connectors are not interchangeable.
  • Match factory options before purchase: heated (2 terminals), turn signal (extra wire), BLIS (radar module in housing), and 360 camera (coaxial lead).
  • For glass-only, confirm the backing plate shape — Ford uses curved and flat passenger glass on different trims; a flat glass will not seat on a curved motor plate.
  • Towing mirrors need the reinforced door bracket and extended harness; standard mirrors reuse the existing three-bolt pattern and plug.

Specs

Generation Fit2013-14 (12th) vs 2015-21 (13th)
Mirror TypeGlass-only vs full assembly
Heated Option2 terminals + dash defrost button
Mount Pattern3-bolt standard / 4-bolt towing

Related searches

What to check before buying

  • Measure the existing mirror housing width and bolt spacing; standard F-150 mirrors use a 3-bolt triangular pattern, towing mirrors use a wider 4-bolt foot.
  • Check the door harness connector pin count — heated and signal mirrors use 8–12 pins; base manual mirrors use 3–4 pins.
  • Verify the truck has the rear-defrost button and BLIS switch on the dash before paying for heated or radar-equipped glass.
  • Confirm the mirror glass curvature: passenger side is convex, driver side is flat on most trims; ordering the wrong curve causes blind spots.

FAQ

All Body, Interior & Hardware Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.