Photos from current listings. Actual item, color, and included accessories may vary.
Headlight Assembly Replacement Buying Guide
Headlight assembly replacement means swapping the entire sealed lamp housing (lens, reflector, and often bulb/socket) rather than just the bulb. The core trade-off is OEM-grade polycarbonate lens and sealed housing quality versus cheap aftermarket units that fog, leak, or misalign. Buy only assemblies that carry a DOT/SAE compliance mark, match your exact model-year-side fitment, and include or reuse the correct bulb type.
At a glance
- Category
- Automotive Lighting
- Data updated
- Nov 15, 2026
Current offers
Highlights
- Lens material is the durability driver: UV-stabilized polycarbonate resists yellowing; cheap acrylic or uncoated PC hazes within a few seasons.
- Housing seals use butyl or silicone gaskets; poorly sealed aftermarket units admit moisture and fog the reflector, killing beam output.
- Halogen vs LED vs HID assemblies differ in reflector optics and wiring; a halogen housing cannot legally or optically accept an LED drop-in.
- Exact fitment is side- and year-specific: right/left and model-year ranges are not interchangeable even when the body style looks similar.
Best use cases
- Best fit: collision or cracked-lens repair on a daily driver — buy a DOT-marked halogen assembly matched to exact year, side, and bulb type.
- Best fit: restoring a faded OEM housing — choose a CAPA-certified or OEM-equivalent assembly with UV-coated polycarbonate lens.
- Wrong fit: upgrading output by dropping LED bulbs into a halogen housing — skip it; buy a purpose-built LED or projector assembly instead.
- Wrong fit: buying by body style alone — skip any listing lacking year-range and left/right confirmation, as mounting tabs differ.
Buying tips
- Match the OEM part number cross-reference (e.g., FO2503370, FO2502326) to your VIN-decoded model year and side before ordering.
- Confirm bulb type the housing is built for (9005, H11, H7); halogen assemblies ship with or without bulbs — verify inclusion.
- Choose assemblies with CAPA or DOT/SAE certification; uncertified housings often fail beam-pattern and glare standards.
- Inspect housing material: OEM-grade polycarbonate with hard coat outlasts generic plastic that crazes under UV and road salt.
Specs
| Lens Material | UV-coated polycarbonate vs generic acrylic |
|---|---|
| Certification | DOT/SAE or CAPA vs uncertified |
| Light Source | Halogen / LED / HID (housing-specific) |
| Fitment Side | Left driver vs right passenger specific |
Related searches
What to check before buying
- Decode your VIN or door-jamb tag for exact model year, trim, and headlight style (halogen vs projector) before selecting.
- Verify left (driver) vs right (passenger) side — listings are side-specific and not interchangeable.
- Check whether the assembly includes bulb, socket, and ballast (for HID) or requires reuse of your original components.
- Confirm your region's lighting compliance (DOT/SAE in North America, ECE elsewhere) so the beam pattern passes inspection.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.


