Turbo 400 Rebuild Kit Buying Guide
A Turbo 400 rebuild kit is a curated set of wear parts — gaskets, seals, clutches, bands, and often bushings or a shift kit — used to restore the GM TH400 three-speed automatic transmission. The core trade-off is completeness versus cost: master kits with clutches, steels, and bands cost more but eliminate repeat teardowns, while seal-and-gasket-only kits are false economy for any high-mileage unit. The decision rule is simple: if the transmission is already out and has over 80,000 miles, buy a full master kit with friction and steel modules; if it is a low-mileage reseal, a gasket and seal kit is sufficient.
At a glance
- Price range
- Price range not synced yet
- Category
- Transmission & Drivetrain Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- TH400 identification anchors kit fit: a 13-inch tailshaft housing and 34-spline output shaft distinguish it from the short-tail TH375 and later 4L80E.
- Master kits typically include all paper gaskets, lip seals, O-rings, clutch frictions and steels, and a band; "deluxe" tiers add bushings, thrust washers, and a transbrake-compatible shift kit.
- Friction material grade matters: stock-style organic clutches suit daily driving, while high-energy or Kevlar-lined frictions handle towing and drag use with higher heat tolerance.
- Case and valve body wear are not fixed by any kit — check the pump stator bore and valve body bores before ordering, or the rebuild will not hold line pressure.
Best use cases
- Best fit: a high-mileage TH400 behind a big-block or diesel tow rig — buy the full master kit with Kolene steels and a towing shift kit for firm, heat-tolerant shifts.
- Best fit: a stock passenger-car TH400 leaking fluid but shifting cleanly — a gasket and seal kit plus a new filter is the correct, economical tier.
- Wrong fit: assuming any "TH400 kit" includes a new torque converter — converters are sold separately; reuse only after a stall and ballooning inspection.
- Wrong fit: buying a racing kit with a transbrake valve body for a street car — the aggressive calibration and increased line pressure cause harsh part-throttle shifts and heat.
Buying tips
- Count the pan bolts: TH400 uses 13 bolts on a rectangular pan; a 17-bolt pan or different shape signals a different GM transmission and the wrong kit.
- Match the output shaft: 2WD TH400 uses a 32-spline output and bolt-on yoke; 4WD units use a 32-spline shaft with a different tail housing — order the correct variant.
- Choose friction count deliberately: stock 5-clutch direct drums are fine for street; towing and performance builds benefit from 6- or 7-clutch direct and forward drums with matching steels.
- Buy kits that state the friction brand and steel finish (e.g., Kolene) — unbranded "heavy-duty" frictions without a material spec are a downgrade, not an upgrade.
Specs
| Kit Tier | Master / Deluxe / Gasket-Seal / Rebuild |
|---|---|
| Friction Material | Organic / High-Energy / Kevlar |
| Steel Finish | Stock / Kolene / Heat-Treated |
| Transmission Fit | TH400 3-speed automatic (1964-1990) |
Related searches
What to check before buying
- Confirm the transmission is a TH400 by checking the 13-bolt pan, 13-inch tail housing, and the ID tag on the passenger side of the case.
- Measure the output shaft spline count and tail housing length before ordering, since 2WD and 4WD kits differ.
- Inspect the case, pump, and valve body for wear or cracks — kits do not include these hard parts and a worn core will not seal.
- Plan for consumables not in every kit: transmission fluid (approximately 12 quarts for a dry fill), a new filter, and a pan gasket if not included.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
