Turbo 350 Transmission Rebuild Kit Buying Guide
A Turbo 350 rebuild kit is a curated set of wear parts—gaskets, seals, clutches, bands, and bushings—needed to restore a TH350 automatic transmission. The core trade-off is kit completeness versus part quality: budget kits omit critical bushings and use organic clutches, while premium master kits include every sealing ring, thrust washer, and high-friction lining for a durable rebuild. The decision rule is simple: if your transmission is staying stock, a full master kit with name-brand friction and sealing components is the durable choice; any kit missing bushings or using off-brand seals is a compromise.
At a glance
- Price range
- Price range not synced yet
- Category
- Transmission & Drivetrain Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- Master kits include gaskets, seals, O-rings, clutches, bands, bushings, and thrust washers; basic kits omit bushings and thrust washers, forcing separate sourcing.
- TH350 friction packs come in organic (stock feel, lower heat tolerance) or high-performance (raybestos/red frictions) grades; the latter handle higher torque and towing.
- Transmission code matters: TH350 (1969-1986) uses a 27-spline input shaft for most V8 applications; TH350C lockup versions need a specific lockup-compatible kit.
- Seal quality is the top durability factor—kits with Viton or polyacrylate seals resist heat and fluid breakdown better than standard nitrile seals.
Best use cases
- Best fit: Stock or mildly upgraded small-block V8 daily driver—choose a full master kit with organic or mild performance clutches and Viton seals for reliable street use.
- Wrong fit: High-torque towing or racing builds—skip basic kits and select a performance kit with raybestos frictions, extra clutches, and a shift correction package.
- Best fit: Rebuilding a 1980s TH350C lockup transmission—pick a kit explicitly labeled for lockup models; standard TH350 kits omit the lockup converter seal and solenoid-related seals.
- Wrong fit: A transmission with worn hard parts (gears, shafts, drums)—a rebuild kit only restores soft parts and sealing; skip the kit until hard-part inspection is complete.
Buying tips
- Count clutch plates: stock TH350 direct drum uses 5 or 6 clutches; performance kits often add one extra plate—verify your drum's spline count and clearance before ordering.
- Check bushing content: a complete kit lists at least 6 bushings including tailshaft, pump, and extension housing; missing bushings mean a second order and shipping delay.
- Match seal material to use: nitrile seals suit stock rebuilds; Viton or polyacrylate seals are mandatory for towing, high-heat, or long-interval fluid changes.
- Identify transmission generation: 1969-1976 TH350 uses a different valve body gasket and filter than 1977-1986 units; order by year range and confirm the pan bolt pattern (13 bolts).
Specs
| Kit Type | Basic vs Master (bushings incl.) |
|---|---|
| Friction Material | Organic / Raybestos / Performance |
| Seal Material | Nitrile vs Viton / Polyacrylate |
| Transmission Fit | TH350 vs TH350C lockup |
Related searches
What to check before buying
- Confirm transmission is a TH350, not a TH350C or 700R4—check the pan shape (square with one cut corner) and 13-bolt pattern before ordering.
- Measure converter pilot diameter and input shaft spline count (27 splines typical) to ensure the kit's front seal and pump bushing fit.
- Inspect the valve body and governor for wear; a rebuild kit does not include these hard parts and a worn core will fail even with new soft parts.
- Verify kit includes a new filter and pan gasket; some master kits omit the filter, requiring a separate purchase.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
