Turbo 350 Rebuild Kit Buying Guide
A Turbo 350 rebuild kit is a bundled set of seals, gaskets, clutches, bands, bearings, and bushings used to restore a GM TH350 three-speed automatic transmission. The primary trade-off is between a basic gasket-and-seal kit that fixes leaks only and a full master kit that replaces friction and wear parts for a complete overhaul. The decision rule: match kit scope to the failure mode — leak repair takes a basic kit, slipping or burned fluid demands a full master kit with new clutches and bands.
At a glance
- Price range
- Price range not synced yet
- Category
- Transmission & Drivetrain Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- TH350 transmissions split into early (1969–1979) and late (1980–1986) case styles; lockup torque converter versions appeared in 1980 and require a kit with the correct front pump seal and lockup solenoid provisions.
- Master kits include clutch plates (typically 5–6 direct and 4–5 forward), band(s), and a gasket/seal set; basic kits omit friction and steel plates and suit only external reseals.
- Bushing and bearing content varies: full kits include the extension housing bushing, pump bushing, and sun gear bushings; cheap kits often omit them and require separate purchase.
- Shift kit compatibility matters — TransGo and B&M reprogramming kits are separate add-ons and should be selected alongside a rebuild kit only if firmer shifts are desired.
Best use cases
- Best fit: a DIY rebuilder with a transmission already removed and a clean bench — buy a full master kit with clutches, bands, and bushings for a complete overhaul.
- Wrong fit: a daily driver with only external fluid seepage — a basic gasket-and-seal kit is sufficient; a full master kit wastes money if internals are healthy.
- Best fit: performance or towing use behind a small-block V8 — choose a kit with upgraded friction materials (e.g., Raybestos or Alto red/performance line) and add a shift kit separately.
- Wrong fit: a TH350C lockup unit — buying a standard TH350 kit leaves lockup solenoid seals unserviced; specify the lockup-compatible kit.
Buying tips
- Identify the transmission year and case style before ordering: 1969–1979 non-lockup vs 1980–1986 lockup (TH350C) use different gasket sets and pump seals.
- Count clutch plates in the listing: a full master kit for TH350 typically includes 5 direct and 4 forward clutch plates plus steels; kits with fewer plates are partial sets.
- Check whether bushings and bearings are included — a full kit lists extension housing, pump, and sun gear bushings; if absent, budget for a separate bushing kit.
- Match band style: TH350 uses a single intermediate band; kits that include a new band are full overhaul kits, while band-less kits require reusing or buying the band separately.
Specs
| Kit Type | Basic seal kit vs full master kit |
|---|---|
| Transmission Years | 1969–1986 (lockup 1980+) |
| Friction Content | Clutch plates/bands incl. or omitted |
| Bushing/Bearing Set | Included in full kits only |
Related searches
What to check before buying
- Verify transmission model and year by pan shape and code — TH350 has a square pan with 13 bolts; confirm lockup vs non-lockup before choosing kit.
- Inspect the torque converter and front pump: if the converter is scored or the pump is worn, a rebuild kit alone will not restore function — plan for a converter and pump purchase.
- Confirm the kit includes a pan gasket and filter; some master kits omit the filter, which must be bought separately.
- Check fluid type and capacity: TH350 uses Dexron/Mercon; plan for 4–5 quarts for a pan drop and 9–11 quarts for a full rebuild fill.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
