Car Gear Picks

Toyota Camry Transmission Buying Guide

The Toyota Camry transmission is the assembly that transfers engine power to the wheels, and across generations it spans conventional torque-converter automatics, CVTs, and hybrid e-CVT transaxles. The core trade-off is rebuild/reman quality versus new OEM or low-mileage used: reman units with upgraded valve bodies and solenoids last, while cheap used or poorly rebuilt units often fail again. The decision rule is simple: match the exact transmission code and generation to your VIN, and buy only from rebuilders who specify upgraded internals and provide a warranty.

Transmission Type:6-speed AT / 8-speed AT / CVT / e-CVTFluid Standard:Toyota WS ATF or TCFE CVT fluidReman vs Used:Reman w/ new solenoids & converter vs usedCode Match:VIN-stamped code (U760E, U761E, etc.)

At a glance

Price range
Price range not synced yet
Category
Transmission & Drivetrain Parts
Data updated
Nov 15, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Toyota Camry automatics progressed from 4-speed (2002-2006), to 6-speed (2007-2017), to 8-speed (2018+ V6), with hybrid models using an e-CVT planetary power-split transaxle.
  • CVT-equipped Camry generations (2018+ I4) require specific Toyota CVT fluid (TCFE) and cannot use conventional ATF; using wrong fluid causes belt/chain slip and premature failure.
  • Remanufactured units should include upgraded valve body, new solenoids, and new torque converter; rebuilt units that reuse original wear parts fail within 20k-30k miles.
  • Transmission code (e.g., U760E, U761E) stamped on the case must match VIN; mismatched codes cause solenoid and TCM communication faults.

Best use cases

  • Daily-driver Camry with slipping or delayed engagement: choose a remanufactured unit with upgraded valve body and warranty, not a junkyard used unit with unknown mileage.
  • Hybrid Camry (e-CVT) with whining or overheating: replace with a low-mileage used transaxle from a verified donor, as e-CVT rebuilds are rare and specialized.
  • Performance or towing use (V6 8-speed): install a reman unit with upgraded clutches and an auxiliary cooler; skip base rebuilds that reuse original friction plates.

Buying tips

  • Match the transmission code stamped on your current case (e.g., U760E for 2012-2017 I4) to the replacement; the code is also on the VIN plate or door jamb sticker.
  • For 2018+ Camry I4 CVT, use only Toyota CVT Fluid TCFE; for 6-speed automatics use Toyota WS ATF; mixing fluids causes valve body and clutch failure.
  • Remanufactured units should list new solenoid pack, updated valve body, and new torque converter; rebuilt units that only replace clutches and seals are lower durability.
  • Hybrid e-CVT transaxles are generally not rebuilt; buy a low-mileage used unit (under 60k miles) from a donor with verified VIN and compression test.

Specs

Transmission Type6-speed AT / 8-speed AT / CVT / e-CVT
Fluid StandardToyota WS ATF or TCFE CVT fluid
Reman vs UsedReman w/ new solenoids & converter vs used
Code MatchVIN-stamped code (U760E, U761E, etc.)

Related searches

What to check before buying

  • Confirm your Camry generation and engine (2.5L I4, 3.5L V6, or hybrid) to determine transmission type: 6-speed, 8-speed, CVT, or e-CVT.
  • Locate the transmission code on the bell housing or VIN sticker; verify it matches the replacement unit's code before purchase.
  • Check transmission fluid cooler lines and mounting bolt pattern; 6-speed and 8-speed units have different bell housing patterns and cannot interchange.
  • For hybrid models, verify high-voltage battery disconnect procedure and transaxle part number; e-CVT units are model-year specific.

FAQ

All Transmission & Drivetrain Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.