Honda Manual Transmission Fluid Buying Guide
Honda Manual Transmission Fluid (MTF) is a dedicated gear lubricant engineered for the synchro and bearing materials in Honda manual gearboxes, and the key trade-off is between the exact Honda formulation and generic gear oils that can degrade shift feel and synchro life. Buyers should choose by Honda part number and transmission generation, not by universal viscosity claims.
Fluid Type:Honda MTF (75W-80 equivalent)OEM Part Number:08798-9031 (qt) / 08798-9031A (case)Fill Volume:1.9-2.0 qt (1.8-1.9 L)Change Interval:30,000-60,000 miles
At a glance
- Price range
- Price range not synced yet
- Category
- Transmission & Drivetrain Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- Honda MTF is specified for manual transaxles and uses a proprietary friction modifier package tuned to Honda brass synchro rings.
- Genuine Honda MTF carries part number 08798-9031 (quart) and 08798-9031A (case), and is the only fluid validated for Civic, Accord, and Fit manual gearboxes.
- Generic 75W-90 GL-4/GL-5 gear oils often exceed Honda's target viscosity and can cause notchy cold shifts or synchro wear in older cable-shift gearboxes.
- Honda MTF is typically a 75W-80 equivalent with a lower viscosity than most aftermarket 75W-90 oils, improving cold-weather shift effort.
Best use cases
- Best fit: 2006-2020 Honda Civic Si or 2016+ Civic manual — use genuine Honda MTF 08798-9031 at the specified 1.9-2.0 qt fill.
- Best fit: Older 1990s-2000s Honda manuals with brass synchros — stick with Genuine Honda MTF to preserve shift quality and avoid GL-5 corrosion.
- Wrong fit: Heavy-duty or track-only use with elevated temperatures — a dedicated racing gear oil with higher thermal stability is required, not OEM MTF.
- Skip: Using universal ATF or motor oil in a Honda manual gearbox — these lack the correct friction modifiers and can cause synchro slip or hard shifting.
Buying tips
- Match the fluid to the transmission code: Civic Si K-series uses the same Honda MTF as base R18 models, but fill volume differs (1.9 qt vs 2.0 qt).
- Buy genuine Honda MTF by part number 08798-9031 for quarts or 08798-9031A for a case of 12; avoid unbranded 'Honda-compatible' fluids.
- For cold climates below -20°F, Honda MTF's 75W-80 viscosity provides easier shifts than 75W-90 alternatives, so do not substitute thicker oil.
- Replace manual transmission fluid every 30,000-60,000 miles under normal driving, and every 30,000 miles for severe service or track use.
Specs
| Fluid Type | Honda MTF (75W-80 equivalent) |
|---|---|
| OEM Part Number | 08798-9031 (qt) / 08798-9031A (case) |
| Fill Volume | 1.9-2.0 qt (1.8-1.9 L) |
| Change Interval | 30,000-60,000 miles |
Related searches
What to check before buying
- Confirm your transmission is a manual transaxle with a drain and fill plug — CVT and automatic Hondas require different fluids (HCF-2 or DW-1).
- Verify fill volume from the owner's manual: most Honda manual gearboxes take 1.9-2.0 qt (1.8-1.9 L).
- Check that you have a 17mm or 3/8-inch drive socket for the drain and fill plugs, and a fluid pump for refilling.
- Ensure the fluid is stored above 32°F before use for accurate viscosity and easy pouring in cold weather.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
