Car Gear Picks

Gl4 Manual Transmission Fluid Buying Guide

GL-4 manual transmission fluid is a gear lubricant formulated for synchromesh manual gearboxes, with the key trade-off being additive chemistry that protects yellow metals (brass synchros) versus extreme-pressure (EP) additive load for heavily loaded gears. The decisive rule: choose a fluid explicitly rated GL-4 (or a GL-4/GL-5 dual-rated fluid only when the manual permits it) and match viscosity and OEM specification to your gearbox—never substitute a GL-5-only gear oil in a transmission with brass synchros.

API Gear Rating:GL-4 (GL-4/GL-5 only if OEM permits)Viscosity Grade:75W-80 / 75W-90 / 80W-90OEM Spec:Manual transmission fluid approvalFill Capacity:1.5–3.0 L typical manual gearbox

At a glance

Price range
Price range not synced yet
Category
Transmission & Drivetrain Parts
Data updated
Nov 15, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • GL-4 is a moderate-EP gear oil category; GL-5 carries roughly twice the EP additive load and can chemically attack brass synchros in older manual transmissions.
  • Most manual transmissions specify a viscosity of 75W-90, 75W-80, or 80W-90; the W number governs cold-shift behavior, the second number governs hot film strength.
  • OEM specification supersedes generic GL ratings—many modern gearboxes require dedicated manual transmission fluid (MTF) with a specific approval or part number.
  • Dual-rated GL-4/GL-5 fluids exist but are only suitable where the manufacturer explicitly permits GL-5-level EP chemistry in that gearbox.

Best use cases

  • Best fit: older cable- or rod-shifted manual gearboxes with brass synchros—choose a straight GL-4 75W-90 or the exact OEM viscosity and specification.
  • Best fit: modern synchronized manual transmissions specifying a dedicated MTF—choose the fluid carrying the OEM approval, not a generic GL-4 gear oil.
  • Wrong fit: transaxles or differentials requiring GL-5—do not pour a GL-4 fluid into a hypoid-gear final drive; the EP load is insufficient.
  • Skip: any GL-4 product without a listed viscosity grade or OEM cross-reference for your gearbox; generic 'universal' gear oil is a compromise, not a match.

Buying tips

  • Check the owner's manual or gearbox tag for the exact viscosity (75W-80, 75W-90, 80W-90) and OEM specification before buying; GL-4 alone is not a full specification.
  • Prefer a fluid with an explicit GL-4 designation on the label; if a GL-4/GL-5 dual rating is shown, confirm the manual permits GL-5 chemistry for that transmission.
  • Match fill volume to the gearbox's stated capacity (commonly 1.5–3.0 liters for manual cars) and buy enough bottles to cover it in one change.
  • For cold climates, a 75W-grade fluid gives easier shifting below freezing than an 80W or straight-grade oil; for hot/towing use, stay within the OEM viscosity rather than jumping grades.

Specs

API Gear RatingGL-4 (GL-4/GL-5 only if OEM permits)
Viscosity Grade75W-80 / 75W-90 / 80W-90
OEM SpecManual transmission fluid approval
Fill Capacity1.5–3.0 L typical manual gearbox

Related searches

What to check before buying

  • Locate the gearbox drain and fill plugs and confirm you have the correct socket (often 17mm hex or Torx) before purchasing fluid.
  • Verify the gearbox fill capacity in liters or quarts from the owner's manual so you buy the right number of bottles.
  • Confirm the required OEM specification or part number on the fluid label or product data sheet, not just the GL-4 rating.
  • Check that the fluid's viscosity grade matches the climate and the manual's recommendation (75W for cold, 80W/90 for warmer or older boxes).

FAQ

All Transmission & Drivetrain Parts buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.