68rfe Transmission Rebuild Kit Buying Guide
A 68RFE rebuild kit is the parts bundle—clutch packs, seals, gaskets, pistons, and often a valve body or solenoid set—needed to restore the Chrysler 68RFE six-speed automatic used behind Cummins 6.7L diesels from 2007.5 onward. The core trade-off is between a master kit with overhaul-grade friction/steel clutches and updated accumulator pistons versus a basic reseal kit that reuses worn hard parts and leaves known failure points untouched. Buy a kit that includes the 2013+ solenoid pack compatibility and upgraded converter-clutch and overdrive piston hardware, or budget for a second teardown.
At a glance
- Price range
- Price range not synced yet
- Category
- Transmission & Drivetrain Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- The 68RFE is a six-speed torque-flange automatic; 2007.5–2012 units use an early solenoid pack and early accumulator pistons that crack, while 2013+ valve bodies and TCM calibration differ and require generation-matched electronics.
- A master overhaul kit should include all six clutch packs (low/reverse, 2C, 4C, overdrive, reverse, and lockup), steels with the updated wave plates, molded pistons, and a complete seal/gasket set; reseal-only kits omit frictions and are for inspection teardowns, not rebuilds.
- Hard-part failures cluster in the converter clutch (shudder and debris), the overdrive piston retainer, and the accumulator pistons; a credible kit bundles these upgraded components rather than the original composite parts.
- Rebuild quality hinges on clearance control and friction material grade (paper vs. carbon), plus a refreshed valve body or recalibrated solenoid pack; a kit without electronics leaves the 68RFE's line-pressure and shift logic unchanged.
Best use cases
- Towing or heavy hauling with a 2007.5–2012 Cummins: choose a full master kit with upgraded accumulator pistons and carbon frictions, and add a rebuilt valve body or updated solenoid pack; skip reseal-only kits.
- Stock daily driver with a failed seal or slipping 2013+ unit: a master kit matched to the 2013+ solenoid/valve body generation is the right tier; a 2007.5–2012 kit will not calibrate correctly on later TCM strategies.
- Core exchange with a worn transmission and no hard-part inspection: buy a kit with pistons and a converter-clutch set plus a new converter, not just gaskets, because reused fatigued steels guarantee repeat failure.
- Performance or tuned trucks above stock torque: skip the base master kit; specify a kit with billet accumulator pistons, upgraded overdrive retainer, and friction rated for the added line pressure, or the clutch packs will glaze.
Buying tips
- Match the kit to model year first: 2007.5–2012 and 2013+ 68RFE units differ in solenoid pack, valve body, and TCM strategy, so the electronics in the kit must match the transmission's generation, not just the truck year.
- Insist on a full master kit that lists all six clutch packs, molded pistons, and a complete seal and gasket set; anything described only as 'reseal' or 'gasket' lacks the frictions and steels that wear.
- Prefer kits that explicitly include upgraded accumulator pistons and an overdrive piston retainer; these are the 68RFE's known fatigue points and are the clearest sign of a rebuild-grade bundle versus a parts assortment.
- Budget for a new or rebuilt torque converter and valve body/solenoid pack alongside the kit; the 68RFE's converter clutch debris and solenoid wear are not fixed by clutch packs alone, and skipping them causes repeat removal.
Specs
| Transmission | 68RFE 6-speed automatic |
|---|---|
| Fitment Years | 2007.5+ Cummins 6.7L diesel |
| Kit Tier | Master overhaul vs reseal-only |
| Generation | 2007.5–2012 vs 2013+ electronics |
Related searches
What to check before buying
- Confirm the transmission build year and TCM generation on the door tag or case stamp—2007.5–2012 versus 2013+—before ordering, because the solenoid pack and valve body connectors are generation-specific.
- Inspect the torque converter and cooler circuit first: if the converter is shuddering or fluid carries clutch debris, add a converter and cooler flush to the rebuild or the new frictions will contaminate.
- Verify the kit's contents against the 68RFE clutch count and piston list—six clutch packs, all molded pistons, and a full seal/gasket set—so you are not paying for a reseal kit at master-kit pricing.
- Plan for transmission fluid, a pan gasket, and a filter, plus any programming or relearn for the solenoid pack/TCM; the rebuild kit alone does not cover fluid or calibration.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
