46re Transmission Rebuild Kit Buying Guide
A 46RE rebuild kit is the gasket, seal, friction, and steel package used to overhaul the Chrysler 46RE/46RH four-speed automatic in Dodge Ram, Dakota, and Durango trucks. The primary decision is friction material and steel-plate completeness: a basic gasket-and-seal kit never restores clutch capacity, while a full rebuild kit with matched frictions, steels, and bushings determines service life. The rule: buy a kit that includes all clutch frictions, steels, seals, gaskets, and bushings for your exact year and valve body, and skip any kit missing the overdrive or low/reverse packs.
At a glance
- Price range
- Price range not synced yet
- Category
- Transmission & Drivetrain Parts
- Data updated
- Nov 15, 2026
Current offers
Highlights
- 46RE is the electronically governed version of the A518/46RH family; 1996+ trucks use the RE valve body and governor solenoid, so pre-1996 RH gasket sets will not seal correctly.
- Friction count and material grade drive holding capacity: stock rebuilds use paper-lined frictions, while towing and heavy-duty builds need high-energy or Kevlar-lined frictions with matching steel plates.
- Bushing and bearing kits are frequently omitted from 'master' kits; worn output-shaft and pump bushings cause the low line pressure that destroys fresh clutch packs.
- Shift correction and accumulator updates are separate from the basic kit; a rebuilt 46RE without a corrected valve body and updated accumulator pistons will repeat the original harsh-shift failure.
Best use cases
- Best fit: daily-driven 1996-2003 Dodge Ram 1500/2500 with a stock 5.2L or 5.9L — choose a full kit with paper frictions, all seals, gaskets, bushings, and a new filter.
- Wrong fit: a truck used for heavy towing or plowing — a stock paper-friction kit will glaze and slip; step up to a high-energy friction set with extra clutches and a shift kit.
- Best fit: a 1994-1995 46RH truck — buy the RH-specific gasket and seal kit, not the RE kit, because the valve body and solenoid layout differ.
- Wrong fit: buying only a gasket-and-seal kit for a transmission that slipped — seals alone do not restore burned frictions or worn steels; the unit will fail again.
Buying tips
- Match the kit to the transmission tag, not the truck model year; 46RE and 46RH share the case but use different valve bodies and governor hardware.
- Count the frictions in the kit against the factory clutch stack: a stock 46RE direct pack uses fewer frictions than a heavy-duty build, and mismatched counts change clearance.
- Verify the kit includes both the overdrive direct and overdrive planetary frictions; many budget kits omit the overdrive section entirely.
- Confirm the kit lists steel plates, not just frictions; used or missing steels cause improper clutch clearance and rapid burn-up.
Specs
| Transmission Family | 46RE / 46RH (A518) 4-speed auto |
|---|---|
| Kit Coverage | Gasket/seal vs full friction & steel |
| Friction Material | Paper stock / high-energy / Kevlar |
| Governor Type | Electronic RE / hydraulic RH |
Related searches
What to check before buying
- Read the transmission identification tag on the passenger side of the case to confirm 46RE versus 46RH before ordering.
- Check the kit contents list for all clutch packs: forward, direct, overdrive direct, overdrive planetary, and low/reverse.
- Confirm the kit includes a new filter and pan gasket, plus the governor solenoid and pressure sensor if your unit is a 1996+ RE.
- Verify bushing and bearing inclusion; if absent, budget for a separate bushing kit before assembly.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
