Car Gear Picks

Photos from current listings. Actual item, color, and included accessories may vary.

Car Lift Buying Guide

A car lift is a fixed or portable hydraulic system that raises a vehicle for underbody service; the core trade-off is structural capacity and lifting height versus ceiling clearance, floor strength, and power supply. Fixed two-post or four-post lifts demand a 220-240V circuit and a 4-inch reinforced concrete slab, while portable scissor lifts run on 120V and can be moved but top out around 28 inches. The decision rule: buy a fixed lift only if you own the slab and ceiling height, otherwise pick a portable lift rated at least 1.5x your vehicle's curb weight.

Lift Type:2-post / 4-post / scissor portableLift Capacity:5,000-10,000 lb per vehiclePower Supply:120V portable / 220-240V fixedMax Lift Height:26-28 in portable / 60-72 in fixed
Typical price range$47.99 – $3,418.99

At a glance

Category
Garage & Shop Equipment
Data updated
Nov 15, 2026

Current offers

Highlights

  • Portable scissor lifts top out at 26-28 inches of lift and run on 120V; fixed two-post lifts reach 60-72 inches but require 220-240V single-phase power.
  • Hydraulic power units are rated in PSI and flow: 2950 PSI at 3 HP suits two-post lifts, while 110V 2.5-gal units serve portable scissor lifts.
  • Lift capacity must exceed curb weight by 50%: a 5,000-lb lift safely handles 3,300-lb sedans but not 5,500-lb SUVs.
  • Two-post lifts need a 4-inch, 3,000-PSI concrete slab with rebar; four-post lifts spread load across a larger footprint and suit weaker slabs.

Best use cases

  • Best fit: portable scissor lift (5,000-7,000 lb, 120V, 26-28 in) for renters or shared garages with standard 8-9 ft ceilings and no slab reinforcement.
  • Best fit: two-post fixed lift (9,000-10,000 lb, 220V) for dedicated home shops with 12 ft ceilings and a 4-inch reinforced slab for tire, brake, and suspension work.
  • Wrong fit: skip a two-post lift in a garage under 10 ft ceiling height or on a post-tension slab; choose a four-post or portable lift instead.
  • Wrong fit: do not use a 1.5-ton floor jack or 5-ton ramps as a substitute for a lift when you need full underbody access; they are wheel-change and fluid-service tools only.

Buying tips

  • Measure ceiling height first: portable lifts need 28 in lift plus vehicle height; two-post lifts need 12 ft for full standing access under an SUV.
  • Match capacity to the heaviest vehicle plus 50% margin: 5,000 lb lift for compacts, 7,000-9,000 lb for mid-size SUVs and trucks.
  • Confirm power: 120V portable lifts plug into a standard 20A outlet; 220-240V two-post lifts need a dedicated 30A breaker and hardwired circuit.
  • Check slab: fixed lifts require 4 in of 3,000-PSI concrete with rebar; test thickness by drilling a small core before committing.

Specs

Lift Type2-post / 4-post / scissor portable
Lift Capacity5,000-10,000 lb per vehicle
Power Supply120V portable / 220-240V fixed
Max Lift Height26-28 in portable / 60-72 in fixed

Related searches

What to check before buying

  • Measure garage ceiling height and door-track clearance; portable lifts need 28 in of rise plus vehicle roof height.
  • Verify concrete slab thickness (4 in minimum) and PSI (3,000+) for any fixed two-post or four-post lift installation.
  • Confirm electrical service: 120V 20A outlet for portable lifts; 220-240V 30A dedicated circuit for fixed lifts.
  • Check vehicle lifting points and wheelbase: portable scissor lifts need frame rails or pinch welds within the lift plate range.

FAQ

All Garage & Shop Equipment buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.